Novel Dissimilar Spot Welding of Aluminum Alloy and Steel Sheets by Friction Stirring - Friction Anchor Welding of Aluminum Alloy and Steel

被引：0

作者：

Ohishi, Kaoru ^{[1
]}

Sakamura, Masaru ^{[1
]}

Ota, Kohei ^{[1
]}

Fujii, Hidetoshi ^{[2
]}

机构：

[1] Joining and Welding Research Institute, Osaka University

来源：

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 2014年 / 32卷 / 01期

关键词：

Aluminum alloy; Dissimilar metals; Friction stirring; Fssw; Projection; Steel;

D O I：

10.2207/qjjws.32.1

中图分类号：

学科分类号：

摘要：

Friction Stir Spot Welding (FSSW) has been applied to a dissimilar metal lap joint of an aluminum alloy and steel by stirring only the upper aluminum alloy sheet. Therefore, FSSW cannot be used to weld a lap joint composed of three or more sheets and a lap joint with an adhesive interlayer. In the present work, we propose a novel spot welding process for dissimilar metal lap joints using a new tool with the tip made of spherical ceramics. When this process is applied to the lap joint of the aluminum alloy and steel, the tool can be plunged into the lower steel sheet, then a steel projection is formed in the aluminum alloy sheet. The height of this steel projection increases with the plunge depth, and accordingly, the weld strength increases; the tensile shear strength and the cross tensile strength reached about 3.6 kN/point and 2.3 kN/point, respectively.

引用

页码：1 / 7

页数：6

共 22 条

[1]

Chiba K., Technology Trend of Improvement Fuel Efficient, the Japan Institute of Light Metals Symposium, 78, pp. 1-5, (2006)

[2]

Ota M., Journal of the Japan Society for Technology of Plasticity, 53, 613, pp. 93-97, (2012)

[3]

Utsu H., Engineering Materials, 52, 8, pp. 26-30, (2004)

[4]

Nakanishi E., Weight reduction of automotive vehicle body and joint technologies, Quarterly Journal of Japan Welding Society, 23, 1, pp. 151-156, (2005)

[5]

Fujimoto M., Development of new joining technology for weight reduction in automotive industries, Journal of Light Metal Welding and Construction, 47, 11, pp. 12-18, (2009)

[6]

Tanaka K., Kumagai M., Yoshida H., Dissimilar joining of aluminum alloy and steel sheets by friction stir spot welding, Journal of Japan Institute of Light Metals, 56, 6, pp. 317-322, (2006)

[7]

Miyagawa K., Tsubaki M., Yasui T., Fukumoto M., Spot welding between aluminum alloy and low carbon steel by friction stirring, Quarterly Journal of Japan Welding Society, 26, 1, pp. 42-47, (2008)

[8]

Aota K., Takahashi M., Ikeuchi K., Friction stir spot welding of aluminum to steel by rotating tool without probe, Quarterly Journal of Japan Welding Society, 26, 3, pp. 227-234, (2008)

[9]

Shoji Y., Takase K., Gendo T., Tao K., Morikawa K., Noguchi T., Development of spot friction welding technology of aluminum alloy and steel, MAZDA Engineering Reports, 24, pp. 90-94, (2006)

[10]

Lee C.Y., Choi D.H., Yeon Y.M., Jung S.B., Dissimilar friction stir spot welding of low carbon steel and al-mg alloy by formation of IMcs, Science and Technology of Welding & Joining, 14, pp. 216-220, (2009)

← 1 2 3 →