Autoregressive model-based vibration fault diagnosis of rolling bearing

被引：5

作者：

He Q. ^{[1
]}

Du D. ^{[1
]}

Wang X. ^{[1
]}

机构：

[1] National Engineering Laboratory for Biomass Power Generation Equipment, School of Energy Power and Mechanical Engineering, North China Electric Power University

来源：

Noise and Vibration Worldwide | 2010年 / 41卷 / 10期

关键词：

Roller bearings;

D O I：

10.1260/0957-4565.41.10.22

中图分类号：

学科分类号：

摘要：

In order to overcome low resolution and poor variance performance in the classic power spectrum, autoregressive model in modern spectrum estimation was developed to diagnose the vibration fault of rolling bearing with noise so that it can get high resolution, smooth power spectrum, and it can be able to identify the fault of rolling bearing, to determine the fault type and improve fault diagnosis rate. The resolution of autocorrelation method, Burg method, and improved covariance method with the simulated vibration signal of rolling bearing with noise was studied. The method to determine optimal order and the resolution of different sampling point for autoregressive model were presented. The results showed that Akaike information criterion, that is AIC-p, is a good method to obtain power spectrum on the order of smooth curve rather than the order of minimum AIC. If the sampling point number is larger, three methods can obtain the same resolution, but if the sampling point number is less, Burg method and improved covariance method can get better resolution than autocorrelation method.

引用

页码：22 / 28

页数：6

共 8 条

[1]

Thanagasundram S., A fault detection tool using analysis from an autoregressive model pole trajectory, Journal of Sound and Vibration, 317, pp. 975-993, (2008)

[2]

Junsheng C., A fault diagnosis approach for roller bearings based on EMD method and AR model, Mechanical Systems and Signal Processing, 20, pp. 350-362, (2006)

[3]

Dron J.P., Rasolofondraibe L., High-resolution methods in vibratory analysis: Application to ball bearing monitoring and production machine, International Journal of Solids and Structures, 38, pp. 4293-4313, (2001)

[4]

Wang G., Luo Z., Fault identification and classification of rolling element bearing based on time-varying autoregressive spectrum, Mechanical Systems and Signal Processing, 22, pp. 934-947, (2008)

[5]

Wu H.Y., Time Series Analysis and Synthesis, pp. 89-95, (2004)

[6]

Yang H., Huang D.S., A study of AR model based on Burg arithmetic for trend forecast of vibration signals, Journal of Nanjing Institute of Technology, 5, 2, pp. 45-49, (2007)

[7]

Zhao L.C., Ma J.J., Research on AR model in vibration analysis of rolling bearings, Chinese Mechanical Engineering, 15, 3, pp. 210-213, (2004)

[8]

Fan Y.S., Modern signal processing methods in mechanical equipment diagnosis, Defense Industry Press, 15-16, pp. 53-59, (2009)

← 1 →