Cost optimization of oil type distribution transformer using multi-objective genetic algorithm

被引：0

作者：

Telli S. ^{[1
]}

Iskender I. ^{[1
]}

Yükselen E. ^{[1
]}

机构：

[1] Çankaya University, Electrical and Electronics Engineering Department, Ankara

来源：

Journal of Energy Systems | 2024年 / 8卷 / 01期

关键词：

Cost optimization; Finite element method; Multi-objective genetic algorithm; Transformer design;

D O I：

10.30521/jes.1383567

中图分类号：

学科分类号：

摘要：

The demand for electrical energy is increasing day by day with the development of technology in the world. Distributing electric energy to all regions that need energy is a principal issue, and this necessitates the use of transformers to convert the voltage to the desired level. Accordingly, the use of transformers, one of the electrical devices converting AC voltage level at a defined frequency has grown significantly. In this study, design parameters of a 25 kVA, 33/0.4 kV, Yzn11, oil-type distribution transformer are optimized using the Multi-Objective Genetic Algorithm (MOGA) technique by decreasing the weight of the significant materials and manufacturing cost. Electromagnetic analysis of the transformer is performed with ANSYS Maxwell based on the design results obtained from the optimization study for validation of the method. The experimental design parameters are also compared with the optimization results. It is observed that optimum results are achieved by using the proposed approach. © 2024 Published by peer-reviewed open access scientific journal, JES at DergiPark (https://dergipark.org.tr/jes)

引用

页码：53 / 62

页数：9

共 19 条

[1]

Chapman Stephen J., Electric Machinery Fundamentals 4th Edition, (2005)

[2]

Kul S, Celtek S.A, Iskender I., Metaheuristic Algorithms Based Approaches for Efficiency Analysis of Three Phase Dry-Type Transformers, Konya Journal of Engineering Sciences, 9, 4, pp. 889-903, (2021)

[3]

Smolka J, Nowak A. J., Shape optimization of coils and cooling ducts in dry-type transformers using computational fluid dynamics and genetic algorithm, IEEE Transactions on Magnetics, 47, 6, pp. 1726-1731, (2011)

[4]

Hernandez C, Lara J, Arjona M.A, Melgoza-Vazquez E., Multi-Objective Electromagnetic Design Optimization of a Power Transformer Using 3D Finite Element Analysis, Response Surface Methodology, and the Third Generation Non-Sorting Genetic Algorithm, Energies, 16, 5, (2023)

[5]

Akdag M, Celebi M., The Weight Optimization of Oil-Type Transformer with Firefly Algorithm, Dicle University Journal of Engineering (DUJE), 13, 2, pp. 169-180, (2022)

[6]

Orosz T, Borbely B, Tamus Z. A., Performance Comparison of Multi Design Method and Meta-Heuristic Methods for Optimal Preliminary Design of Core-Form Power Transformers, Periodica Polytechnica Electrical Engineering and Computer Science, 61, 1, pp. 69-76, (2017)

[7]

Orosz T, Panek D, Karban P., FEM Based Preliminary Design Optimization in case of Large Power Transformers, Applied Sciences, 10, 4, (2020)

[8]

Soldoozy A, Esmaeli A, Akbari H, Mazloom S., Implementation of Tree Pruning Method for Power Transformer Design Optimization, International Transactions on Electrical Energy Systems, 29, 1, pp. 1-19, (2018)

[9]

Alonso B, Meana-Fernandez A, Oro F., Thermal Response and Failure Mode Evaluation of a Dry-Type Transformer, Applied Thermal Engineering, 120, pp. 763-771, (2017)

[10]

Ozupak Y, Mamis S., Thermal Field Analysis of Power Transformer by Combined Electromechanical Finite Element Method, Erzincan University Journal of Science and Technology, 12, 2, pp. 934-941, (2019)

← 1 2 →