Dynamic compaction real-time detection based on acceleration measurement

被引：0

作者：

Xia, Dong-Chao ^{[1
]}

Li, Wan-Li ^{[1
]}

机构：

[1] School of Mechanical Engineering, Tongji University, Shanghai

来源：

Zhendong yu Chongji/Journal of Vibration and Shock | 2015年 / 34卷 / 15期

关键词：

Acceleration; Dynamic compaction; Real-time detection;

D O I：

10.13465/j.cnki.jvs.2015.15.009

中图分类号：

TN911 [通信理论];

学科分类号：

081002 ;

摘要：

With advantages of easy use, low cost, good effects and wide application range, the dynamic compaction is widely used in ground construction. According to its technical regulations, the ramming value measurement methods are currently applied in the real-time compaction level detection, but the existing methods all have their defects. To improve the situation, using the rammer impact acceleration to detect the compaction level. Firstly, the dynamic compaction's impact model was established and the relationship between the rammer's acceleration and ramming times was derived through theoretical analysis, then the test model was built based on the similarity theory, the model tests were conducted to get data for verification. The final results showed that the relation between relative change percentages of a single ramming value and peak acceleration is obtained, the assumption detecting real-time compaction level based on impact acceleration is deduced, thus a new way to detect the real-time compaction during the construction is provided. ©, 2015, Chinese Vibration Engineering Society. All right reserved.

引用

页码：45 / 50

页数：5

共 8 条

[1] Liu C., Wen Y., Wang H.-Q., The application of wave theory in the mechanism of subgrade reinforcement by dynamic compaction, Soie Engineering and Foundation, 18, 1, pp. 47-49, (2004)
[2] Sun Y.-P., Xi K., Zhang Y.-H., The reasonable choice of tension weight parameter for dynamic consolidation construction, Technology of Communications, 2, pp. 38-40, (1999)
[3] Qian J.-H., Shuai F.-S., The boundary element method in the application of the foundation consolidation, Science in China Series A, 3, pp. 329-336, (1987)
[4] Qian J.-H., Qian X.-D., Zhao W.-B., Dynamic consolidation theory and practice, Chinese Journal of Geotechnical Engineering, 8, 6, pp. 1-17, (1986)
[5] Gutzwiller M.C., The impact of a rigid circular cylinder on an elastic solid, Philosophical Transactions of Royal Society of London Series A: Mathematical and Physical Sciences, 255, 1053, pp. 153-191, (1962)
[6] Sun J.-Z., Tan H.-H., Qi S.-W., Frequency domain analysis of dynamic compaction vibration, Chinese Journal of Geotechnical Engineering, 22, 4, pp. 412-415, (2000)
[7] Cai Y.-Q., Chen R.-W., Xu C.-J., Numerical analysis of dynamic compaction using large deformation theory, Journal of Zhejiang University, 39, 1, pp. 65-69, (2005)
[8] Zhao K., Shi L., Luo S.-H., The design of convenient device for dynamic compaction model test and its application, Journal of Xi'an University of Architecture & Technology, 44, 2, pp. 224-230, (2013)

← 1 →