Resistance characteristics of dense-phase pneumatic conveying pulverized coal with various particle size under high pressure

被引:0
作者
Liang, Cai [1 ]
Chen, Xiaoping [1 ]
Lu, Peng [1 ]
Pu, Wenhao [1 ]
Zhou, Yun [1 ]
Xu, Pan [1 ]
Zhao, Changsui [1 ]
机构
[1] School of Energy and Environment, Southeast University
来源
Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition) | 2009年 / 39卷 / 03期
关键词
Dense-phase; High pressure; Local pressure drop; Particle size; Pressure drop;
D O I
10.3969/j.issn.1001-0505.2009.03.041
中图分类号
学科分类号
摘要
Dense-phase pneumatic conveying experiments of pulverized coal with various particle sizes were carried out at the experimental facility. Based on analyzing the stability and accuracy of experimental system, the influences of the conveying pressure, the coal particle sizes and the conveying velocity on pressure drops of different pipe sections, local pressure drop characteristics and quality of conveying gas were investigated. The results indicate that pressure drops of different pipe sections increase first and then decrease with the increase in conveying velocity. Under a constant mass flow rate and conveying pressure, the larger the mean coal particle sizes are, the greater the pressure drops are. Gas conveying capacity rises but pressure drops and ΔPv-ΔPh decreases with the increase in conveying pressure at the constant solid-gas ratio and conveying velocity. Local pressure drop of bend pipe reduces first and then remains nearly flat with the increase in superficial velocity. There are positive correlations between coal particle size and local pressure drop. The bend equivalent coefficient K which does not relate to the conveying velocity and the solid-gas ratio is affected by the coal particle size and the conveying pressure. The bend equivalent coefficient K increases first and then decreases with the increase in coal particle size.
引用
收藏
页码:641 / 645
页数:4
相关论文
共 8 条
  • [1] Vasquez N., Jacob K., Cocco R., Et al., Visual analysis of particle bouncing and its effect on pressure drop in dilute phase pneumatic conveying, Powder Technology, 179, 3, pp. 170-175, (2007)
  • [2] Rajniak P., Dhanasekharan K., Sinka C., Et al., Modeling and measurement of granule attrition during pneumatic conveying in a laboratory scale system, Powder Technology, 185, 3, pp. 202-210, (2008)
  • [3] Lain S., Sommerfeld M., Euler/Lagrange computations of pneumatic conveying in a horizontal channel with different wall roughness, Powder Technology, 184, 1, pp. 76-88, (2008)
  • [4] Pahk J.B., Klinzing G.E., Comparison of flow characteristics for dilute phase pneumatic conveying for two different plastic pellets, Journal of the Chinese Institute of Chemical Engineers, 39, 2, pp. 143-150, (2008)
  • [5] Klinzing G.E., Marcus R.D., Rizk F., Et al., Pneumatic Conveying of Solid, pp. 117-119, (1992)
  • [6] Liang C., Zhao C.S., Chen X.P., Et al., Flow characteristics and Shannon entropy analysis of dense-phase pneumatic conveying of variable moisture content under high pressure, Chemical Engineering and Technology, 30, 7, pp. 926-931, (2007)
  • [7] Chen X.P., Fan C.L., Liang C., Et al., Investigation on characteristics of pulverized coal dense-phase pneumatic conveying under high pressure, Korean Journal of Chemical Engineering, 24, 3, pp. 499-502, (2007)
  • [8] Pu W.H., Zhao C.S., Xiong Y.Q., Et al., Three-dimensional numerical simulation of dense pneumatic conveying of pulverized coal in a vertical pipe at high pressure, Chemical Engineering and Technology, 31, 2, pp. 215-223, (2008)