Effect of Thermal Contact Conductanceon Temperature Field of CFRTP/Stainless Steel Laser Direct Joining

被引：0
|
作者：
Wang Q. [1 ]
Jiao J. [1 ]
Zan S. [1 ]
Zhang W. [1 ]
机构：
[1] Ningbo Institute of Industrial Technology, Chinese Academy of Sciences, Ningbo, 315201, Zhejiang
来源：
Zhongguo Jiguang/Chinese Journal of Lasers | 2017年 / 44卷 / 04期
关键词：
Clamping pressure; Finite element model; Laser direct joining; Laser technique; Thermal contact conductance; Thermal contact model;
D O I：
10.3788/CJL201744.0402002
中图分类号：
学科分类号：
摘要：
To improve the numerical simulation accuracy of carbon fiber reinforced thermal plastic (CFRTP)/stainless steel laser direct joining (LDJ), a fitting formula of thermal contact conductance is established based on the experiments. Taking the thermal contact resistance into account, we establish a three-dimensional finite element thermal contact model of LDJ. The theoretical simulation and experimental results are compared and analyzed. The results show that the thermal contact model is more consistent with the reality compared with the traditional model. Therefore, the thermal contact model can be used to characterize the influence of clamping pressure on the laser joining quality. When the laser power is 339 W and the clamping pressure is 0.1 MPa, the relative error is 12.3% for the traditional model and it is reduced to 2.8% for the thermal contact model. The numerical model can help to improve the accuracy of numerical simulation in the process of LDJ and choose optimal technological parameters. © 2017, Chinese Lasers Press. All right reserved.
引用
收藏
相关论文
共 14 条
  • [1] Acherjee B., Kuar A.S., Mitra S., Et al., Modeling of laser transmission contour welding process using FEA and DoE, Optics & Laser Technology, 44, 5, pp. 1281-1289, (2012)
  • [2] Mayboudi L.S., Birk A.M., Zak G., Et al., A three-dimensional thermal finite element model of laser transmission welding for lap-joint, International Journal of Modelling and Simulation, 29, 2, pp. 149-155, (2009)
  • [3] Liu H., Liu W., Meng D., Et al., Simulation and experimental study of laser transmission welding considering the influence of interfacial contact status, Materials & Design, 92, pp. 246-260, (2016)
  • [4] Zhang L., Li L., Tan W., Et al., Inverse heat conduction model for determining interfacial heat transfer coefficient during casting solidification, The Chinese Journal of Nonferrous Metals, 24, 1, pp. 82-90, (2014)
  • [5] Guo Z., Xiong S., Cao S., Et al., Effects of alloy materials and process parameters on the heat transfer coefficient at metal/die interface in high pressure die casting, Acta Metallurgica Sinica, 44, 4, pp. 433-439, (2008)
  • [6] Dhorajiya A., Mechanical and heat transfer finite element modeling of transmission laser micro joining, (2008)
  • [7] Taha Z.A., Roy G.G., Hajim K.I., Et al., Mathematical modeling of laser-assisted transmission lap welding of polymers, Scripta Materialia, 60, 8, pp. 663-666, (2009)
  • [8] Jiao J., Wang Q., Wang F., Et al., Numerical and experimental investigation on joining CFRTP and stainless steel using fiber lasers, Journal of Materials Processing Technology, 240, pp. 362-369, (2017)
  • [9] Chu Q., He X., Yu G., Et al., Numerical simulation and analysis on temperature field for laser welded stainless steel lap joint, Chinese J Lasers, 37, 12, pp. 3180-3186, (2010)
  • [10] Hu L., Zhou D., Jia X., Et al., Numerical simulation and laser butt welding of Zr-Sn-Nb-Fe zirconium alloy sheets, Chinese J Lasers, 43, 7, (2016)
12