CFD analysis of hydrodynamic pressure distribution in non-newtonian oil in journal bearing lubrication gap

被引：4

作者：

Czaban, Adam ^{[1
]}

机构：

[1] Gdynia Maritime University, Morska 81-87, Gdynia

来源：

Solid State Phenomena | 2015年 / 220-221卷

关键词：

CFD; Hydrodynamic pressure distribution; Journal bearing; Ostwald–de Waele lubricant;

D O I：

10.4028/www.scientific.net/SSP.220-221.37

中图分类号：

学科分类号：

摘要：

This paper presents the results of CFD analysis of the hydrodynamic pressure distribution in slide journal bearings lubricated by non-Newtonian oil. It was assumed that the oil shear stress varies from shear rate according to the Ostwald–de Waele relationship (power law lubricant). The comparison was related to bearings differences only in properties of lubricating oil – Newtonian and non-Newtonian properties; other parameters for both in each case were the same. The Tables show relative decrease of the maximum hydrodynamic pressure value and bearing lift capacity according to the bearing lubricated with Newtonian oil, for different values of bearing relative eccentricity. © (2015) Trans Tech Publications, Switzerland.

引用

页码：37 / 42

页数：5

共 6 条

[1]

Nowak Z., Wierzcholski K., Flow of a non-Newtonian power law lubricant through the conical bearing gap, Acta Mechanica, 50, pp. 221-230, (1984)

[2]

Ramirez-Gonzalez V., Aguayo J.P., Quinones-Cisneros S.E., U.K. Deiters, non-Newtonian viscosity modeling of crude oils–comparison among models, Int. J. Thermophys, 30, pp. 1089-1105, (2009)

[3]

Czaban A., The influence of temperature and shear rate on the viscosity of selected motor oils, Solid State Phenomena, 199, pp. 188-193, (2013)

[4]

Deligant M., Podevin P., Descombes G., CFD model for turbocharger journal bearing performances, Applied Thermal Engineering, 31, pp. 811-819, (2011)

[5]

Miszczak A., Analiza hydrodynamicznego smarowania ferrociecza poprzecznych lozysk _lizgowych, (2006)

[6]

(2009)

← 1 →