Viscoelastic behaviour of nanocomposites enhanced by graphene: An overview

被引：8

作者：

Parente J.M. ^{[1
]}

Silva M.P. ^{[1
]}

Santos P. ^{[1
]}

Reis P.N.B. ^{[1
]}

机构：

[1] C-MAST, Department of Electromechanical Engineering, University of Beira Interior, Covilhã

来源：

Material Design and Processing Communications | 2019年 / 1卷 / 06期

关键词：

graphene; mechanical testing; nanocomposites; viscoelastic behaviour;

D O I：

10.1002/mdp2.99

中图分类号：

学科分类号：

摘要：

The use of nanoparticles has been widely studied and applied in numerous engineering and commercial areas due to its unique surface effect and increased chemical activity and physical properties. Literature reports great performances, such as strength, stiffness, and thermal properties, with adding low concentrations of nanoparticles into polymers but without compromising density, toughness, or manufacturing process. Graphene is one of the most recent nanoparticles that, due to their unique properties, have motivated the interest of the scientific community. When they are added to the polymer matrices, the mechanical properties are significantly improved. However, the static mechanical properties are the main characterization performed, but, for long-term applications, viscoelastic studies are required to characterize conveniently. Creep and stress relaxation are the two main tests to characterize the nanoenhaced resins behaviour. Therefore, this paper intends to provide a critical overview about the studies available in the literature on this subject. © 2019 John Wiley & Sons, Ltd.

引用

共 47 条

[1]

Rahmani H., Najafi S.H.M., Ashori A., Mechanical performance of epoxy/carbon fiber laminated composites, J Reinf Plast Compos., 33, 8, pp. 733-740, (2014)

[2]

Gantayat S., Rout D., Swain S.K., Carbon nanomaterial–reinforced epoxy composites: a review, Polym Plast Technol Eng, 57, 1, pp. 1-16, (2018)

[3]

Domun N., Hadavinia H., Zhang T., Sainsbury T., Liaghat G.H., Vahid S., Improving the fracture toughness and the strength of epoxy using nanomaterials—a review of the current status, Nanoscale Adv., 7, 23, pp. 10294-10329, (2015)

[4]

Choi W., Lahiri I., Seelaboyina R., Kang Y.S., Synthesis of graphene and its applications: a review, Crit Rev Solid State Mater Sci., 35, 1, pp. 52-71, (2010)

[5]

Wei J., Vo T., Inam F., Epoxy/graphene nanocomposites—processing and properties: a review, RSC Adv., 5, 90, pp. 73510-73524, (2015)

[6]

Rohini R., Katti P., Bose S., Tailoring the interface in graphene/thermoset polymer composites: a critical review, Polym J., 70, pp. A17-A34, (2015)

[7]

Saravanan N., Rajasekar R., Mahalakshmi S., Sathishkumar T.P., Sasikumar K., Sahoo S., Graphene and modified graphene-based polymer nanocomposites—a sreview, J Reinf Plast Compos., 33, 12, pp. 1158-1170, (2014)

[8]

Singh R.K., Kumar R., Singh D.P., Graphene oxide: strategies for synthesis, reduction and frontier applications, RSC Adv., 6, 69, pp. 64993-65011, (2016)

[9]

Papageorgiou D.G., Kinloch I.A., Young R.J., Mechanical properties of graphene and graphene-based nanocomposites, Prog Mater Sci., 90, pp. 75-127, (2017)

[10]

Li F., Jiang X., Zhao J., Zhang S., Graphene oxide: a promising nanomaterial for energy and environmental applications, Nano Energy., 16, pp. 488-515, (2015)

← 1 2 3 4 5 →