Experimental Research of Dynamic Characteristics for Long Wall Shearer Cutting Unit Gearbox in Straight Line Cutting

被引：0
|
作者：
Zhang R. [1 ]
Zhu L.-S. [2 ]
Zhang Y.-M. [3 ]
机构：
[1] School of Mechanical Engineering & Automation, Northeastern University, Shenyang
[2] College of Mechanical Automotive Engineering, Zhaoqing University, Zhaoqing
[3] Equipment Reliability Institute, Shenyang University of Chemical Technology, Shenyang
来源：
Dongbei Daxue Xuebao/Journal of Northeastern University | 2019年 / 40卷 / 12期
关键词：
Beat vibration phenomenon; Cutting unit gearbox; Dynamic characteristics; Long wall shearer; Vibration experiment;
D O I：
10.12068/j.issn.1005-3026.2019.12.014
中图分类号：
学科分类号：
摘要：
The vibration characteristics of a long wall shearer's cutting unit gearbox (SCUG) are mostly investigated by theoretical models, however, these results are lacking in experimental validation. For validating theoretical results and investigating some nonlinear dynamic characteristics of SCUG, a dedicated test set-up which can simulate the real coal mining process is developed to operate the long wall shearer in loaded and unloaded working conditions. Vibration severity is taken as a comparison standard of theoretical and experimental results. Cutting depth, traction speed and coal hardness are considered as the experimental variables and the contributions of these factors to the vibration of SCUG are ranked. Coal hardness mutation, beat vibration phenomenon and motor run-up impact which can contribute to the resonance and fatigue damage of SCUG are analyzed in the experiment, and the impact of drum load on them is also quantified. The data obtained by the experiment and the relevant conclusions may provide a certain reference for the correct understanding of vibration response and reliability analysis of SCUG. © 2019, Editorial Department of Journal of Northeastern University. All right reserved.
引用
收藏
页码：1744 / 1749
页数：5
相关论文
共 11 条
  • [1] Zhang R., Zhang Y.-M., Zhu L.-S., Et al., Vibration characteristics for the rocker arm of shearer with gear meshing excitation, Journal of Northeastern University(Natural Science), 39, 1, pp. 108-112, (2018)
  • [2] Zhu L.S., Zhang Y.M., Zhang R., Et al., Time-dependent reliability of spur gear system based on gradually wear process, Eksploatacja I Niezawodnosc-Maintenance and Reliability, 20, 2, pp. 207-218, (2018)
  • [3] Zhu L.S., Zhang R., Zou C.Q., Research on vibration characteristics of gear-coupled multi-shaft rotor-bearing systems under the excitations of unbalance, Journal of Vibroengineering, 19, 6, pp. 305-314, (2017)
  • [4] Scondkar P., Kahraman A., A dynamic model of a double-helical planetary gear set, Mechanism and Machine Theory, 70, pp. 157-174, (2013)
  • [5] Parker R.G., Wu X.H., Vibration modes of planetary gears with unequally spaced planets and an elastic ring gear, Journal of Sound and Vibration, 329, pp. 2265-2275, (2010)
  • [6] Zhou D., Zhang X.F., Zhang Y.M., Dynamic reliability analysis for planetary gear system in shearer mechanisms, Mechanism and Machine Theory, 105, pp. 244-259, (2016)
  • [7] Liu C.Z., Qin D.T., Liao Y.H., Electromechanical dynamic analysis for the drum driving system of the long-wall shearer, Advances in Mechanical Engineering, 7, 10, pp. 1-14, (2015)
  • [8] Liu C.Z., Qin D.T., Liao Y.H., Dynamic analysis for the cutting electromechanical transmission system in the long-wall shearer, Journal of Mechanical Engineering, 52, 7, pp. 15-19, (2016)
  • [9] Yang Y., Fan H., Ma P.C., Research on dynamic characteristics for longwall shearer cutting transmission system with varying cutting speed, International Journal of Precision Engineering and Manufacturing, 18, 8, pp. 1131-1138, (2017)
  • [10] Huang J., Dynamic research and dynamic-gradual coupling reliability analysis of the transmission system of a shearer cutting arm, pp. 100-215, (2016)
12