Research progress on tribological properties of high-entropy alloy coatings

被引：0

作者：

Liu Y.-F. ^{[1
]}

Chang T. ^{[2
]}

Liu X.-B. ^{[1
,3
]}

Zhu Y. ^{[1
]}

Wang G. ^{[1
]}

Meng Y. ^{[1
]}

Liang J. ^{[1
]}

Xie J.-C. ^{[4
]}

机构：

[1] Hunan Province Key Laboratory of Materials Surface/Interface Science & Technology, Central South University of Forestry & Technology, Changsha

[2] Xi’an Aerospace Propulsion Institute, Xi’an

[3] State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou

[4] Laboratoire Roberval, Université de Technologie de Compiègne, Compiègne

来源：

Surface Technology | 2021年 / 50卷 / 08期

基金：

中国国家自然科学基金;

关键词：

Application advantages; Coatings; High-entropy alloy; Limitations; Material systems design; Tribological properties;

D O I：

10.16490/j.cnki.issn.1001-3660.2021.08.014

中图分类号：

学科分类号：

摘要：

Compared with the design methods and performance laws of traditional alloys, a new material system high-entropy alloys (HEA), provides new research and development ideas, and has shown excellent performance and potential in various application fields, which injects new vitality for the alloy field. This paper focused on the field of coatings, briefly introduced the definition of high-entropy alloys, and explained its four basic core effects (high-entropy effect, sluggish diffusion effect, lattice distortion effect and “cocktail” effect) with new understanding and expansion of the researches in recent years. Then it was found that there were still many characteristics and laws in the special random structure, which had not yet been thoroughly studied and understood, so that the orientation of the phase composition still cannot be accurately predicted and controlled. Starting from different strengthening methods, the tribological researches were classified according to three points including material system design, second phase doping, and process treatment, researches and applications of high-entropy alloy coating in the field of tribology were illustrated, and the respective strengthening mechanisms were summarized. By discussing the specific performance of different element compositions, composite methods, preparation processes and post-treatment methods, the key factors affecting the tribological properties of the coating surface were summarized, and new feasibility or research potentials for improving the friction and wear resistance of the coating were explored. Finally, the shortcomings of high-entropy alloy coatings in current research were discussed. The main opinions were that the basic theoretical researches were not systematic and comprehensive, so that there was still a large gap compared with traditional alloys in fields of precise control and coating quality for industrial applications. And the explorations of the self-lubricating composite systems were still relatively limited, therefore the above work will be the focus of research in the field of tribology. © 2021, Chongqing Wujiu Periodicals Press. All rights reserved.

引用

页码：156 / 169

页数：13

共 78 条

[1] Yeh J.W., Chen S.K., Lin S., Et al., Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes[J], Advanced Engineering Materials, 6, 5, pp. 299-303, (2004)
[2] George E.P., Curtin W.A., Tasan C.C., High entropy alloys: A focused review of mechanical properties and deformation mechanisms[J], Acta Materialia, 188, pp. 435-474, (2020)
[3] Kim Y K., Yang S.-S., Lee K.A., Superior tempe-rature-dependent mechanical properties and deformation behavior of equiatomic CoCrFeMnNi high-entropy alloy additively manufactured by selective laser melting[J], Scientific Reports, 10, (2020)
[4] Jiang Y., Li Q., Juan J., Et al., Evolution in microstructure and corrosion behavior of AlCoCrxFeNi high-entropy alloy coatings fabricated by laser cladding[J], Journal of Alloys and Compounds, 775, pp. 1-14, (2019)
[5] Qiu X.-W., Wu M.-J., Liu C.-G., Et al., Corrosion performance of Al2CrFeCoxCuNiTi high-entropy alloy coatings in acid liquids[J], Journal of Alloys and Compounds, 708, pp. 353-357, (2017)
[6] Chang F., Cai B.-J., Zhang C., Et al., Thermal stability and oxidation resistance of FeCrxCoNiB high-entropy alloys coatings by laser cladding[J], Surface and Coatings Technology, 359, pp. 132-140, (2019)
[7] Huang C., Zhang Y.-Z., Shen J.-Y., Et al., Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti-6Al-4V alloy[J], Surface and Coatings Technology, 206, 6, pp. 1389-1395, (2011)
[8] Jin K., Lu C., Wang L.M., Et al., Effects of compositional complexity on the ion-irradiation induced swelling and hardening in Ni-containing equiatomic alloys[J], Scripta Materialia, 119, pp. 65-70, (2016)
[9] Nagase T., Rack P., Noh D., Et al., In-situ TEM observation of structural changes in nano-crystalline CoCrCuFeNi multicomponent high-entropy alloy (HEA) under fast electron irradiation by high voltage electron microscopy (HVEM)[J], Intermetallics, 59, pp. 32-42, (2015)
[10] Yang T.-F., Guo W., Poplawsky J.D., Et al., Structural damage and phase stability of Al0.3CoCrFeNi high entropy alloy under high temperature ion irradiation [J], Acta Materialia, 188, pp. 1-15, (2020)

← 1 2 3 4 5 6 7 8 →