The influence of the gate geometry on selected process parameters in the high pressure die casting technology

被引：0
作者：
Majernik J. [1 ]
Gaspar S. [2 ]
Podaril M. [1 ]
Kolinsky J. [1 ]
机构：
[1] Institute of Technology and Business in České Budějovice, Okružní 517/10, České Budějovice
[2] The Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov, Bayerova 1, Prešov
来源：
Manufacturing Technology | 2019年 / 19卷 / 01期
关键词：
Gate; High pressure die casting; Technological parameters;
D O I：
10.21062/ujep/251.2019/a/1213-2489/mt/19/1/101
中图分类号：
学科分类号：
摘要：
The design of the gating system and the adjustment of the technological parameters of high pressure die casting are closely correlated. Correct connection of the gating system structure and technological parameters will be reflected in the final casting quality. Significant influence on the filling progress of a mold cavity has a gate and its geometry. Within the gate, the final increasing of melt flow velocity arises and determines the filling mode. The contribution is devoted to the influence of the gate height on selected technological parameters. The obtained data are being evaluated and on the basis of the experimental results assessment, the recommendations applicable in the foundry industry are being deduced. © 2019. Published by Manufacturing Technology.
引用
收藏
页码：101 / 106
页数：5
相关论文
共 50 条
  • [31] Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting - Effect of the process parameters
    Dour, G
    Dargusch, M
    Davidson, C
    Nef, A
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 169 (02) : 223 - 233
  • [32] A HIGH STRENGTH ALUMINUM ALLOY FOR HIGH PRESSURE DIE CASTING
    Ji, Shouxun
    Yan, Feng
    Fan, Zhongyun
    LIGHT METALS 2016, 2016, : 207 - 210
  • [33] Lost Cores for High-Pressure Die Casting
    Jelinek, P.
    Adamkova, E.
    ARCHIVES OF FOUNDRY ENGINEERING, 2014, 14 (02) : 101 - 104
  • [34] Effect of temperature on the properties of high pressure die casting
    Dul, Jenoe
    Szabo, Richard
    Simcsak, Attila
    SOLIDIFICATION AND GRAVITY V, 2010, 649 : 473 - 479
  • [35] INFLUENCE OF VACUUM ON ADJUSTING PARAMETERS OF HIGH PRESSURE DIE CASTING PARTS FROM ALLOY AlSi9Cu3(Fe)
    Ferdyn, Maciej
    Piatkowski, Jaroslaw
    29TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2020), 2020, : 914 - 918
  • [36] Virtual prototyping in the design process of optimized mould gating system for high pressure die casting
    Raffaeli, Roberto
    Favi, Claudio
    Mandorli, Ferruccio
    ENGINEERING COMPUTATIONS, 2015, 32 (01) : 102 - 128
  • [37] Determination of interfacial heat transfer coefficient and its application in high pressure die casting process
    Cao Yongyou
    Guo Zhipeng
    Xiong Shoumei
    China Foundry, 2014, 11 (04) : 314 - 321
  • [38] Three dimensional modelling of high pressure die casting
    Cleary, PW
    Ha, J
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2000, 12 (06) : 357 - 365
  • [39] Development of a Squeeze Semisolid High-Pressure Die Casting Process for Magnesium Structural Parts
    Vicario, Iban
    Crespo, Inigo
    Val, D.
    Weiss, U.
    Cao, D.
    Martinez de la Pera, Ignacio
    Mikel Sanchez, Jon
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (07) : 3935 - 3940
  • [40] Improving the Design of Nozzles Used in Zamak High-Pressure Die-Casting Process
    Sousa, V. F. C.
    Silva, F. J. G.
    Ferreira, L. P.
    Campilho, R. D. S. G.
    Pereira, T.
    Braga, E.
    FME TRANSACTIONS, 2021, 49 (04): : 1005 - 1013
12345