The influence of the gate geometry on selected process parameters in the high pressure die casting technology

被引：0
|
作者：
Majernik J. [1 ]
Gaspar S. [2 ]
Podaril M. [1 ]
Kolinsky J. [1 ]
机构：
[1] Institute of Technology and Business in České Budějovice, Okružní 517/10, České Budějovice
[2] The Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov, Bayerova 1, Prešov
来源：
Manufacturing Technology | 2019年 / 19卷 / 01期
关键词：
Gate; High pressure die casting; Technological parameters;
D O I：
10.21062/ujep/251.2019/a/1213-2489/mt/19/1/101
中图分类号：
学科分类号：
摘要：
The design of the gating system and the adjustment of the technological parameters of high pressure die casting are closely correlated. Correct connection of the gating system structure and technological parameters will be reflected in the final casting quality. Significant influence on the filling progress of a mold cavity has a gate and its geometry. Within the gate, the final increasing of melt flow velocity arises and determines the filling mode. The contribution is devoted to the influence of the gate height on selected technological parameters. The obtained data are being evaluated and on the basis of the experimental results assessment, the recommendations applicable in the foundry industry are being deduced. © 2019. Published by Manufacturing Technology.
引用
收藏
页码：101 / 106
页数：5
相关论文
共 50 条
  • [21] Development of thermal boundary condition model at metal/die interface of high pressure die casting process
    Guo, Z. -P.
    Xiong, S. -M.
    Liu, B. C.
    Li, M.
    Allison, J.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2011, 24 (3-4) : 151 - 157
  • [22] Simulation of high pressure Die casting solidification
    Molnár, D
    Dúl, J
    Szabó, R
    SOLIDIFICATION AND GRAVITY IV, 2006, 508 : 555 - 559
  • [23] Effects of casting process parameters on porosity and mechanical properties of high pressure die cast ADC12Z alloy
    Yan, Yan-Fu
    Xiong, Shou-Mei
    Liu, Bai-Cheng
    Li, Mei
    Allison, John
    SHAPE CASTING: 2ND INTERNATIONAL SYMPOSIUM, 2007, : 283 - +
  • [24] RELATIONSHIP BETWEEN METAL-DIE INTERFACIAL HEAT TRANSFER COEFFICIENT AND CASTING SOLIDIFICATION RATE IN HIGH PRESSURE DIE CASTING PROCESS
    Guo Zhipeng
    Xiong Shoumei
    Mei Li
    Allison, John
    ACTA METALLURGICA SINICA, 2009, 45 (01) : 102 - 106
  • [25] Determination of the metal/die interfacial heat transfer coefficient and its application in evaluating the pressure distribution inside the casting during the high pressure die casting process
    Guo, Z. -P.
    Xiong, S. -M.
    Liu, B. C.
    Li, M.
    Allison, J.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2009, 22 (1-4) : 327 - 330
  • [26] Characterisation of the spray cooling heat transfer involved in a high pressure die casting process
    Liu, GW
    Morsi, YS
    Clayton, BR
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2000, 39 (05) : 582 - 591
  • [27] Influence of Piston Lubricant on the Distribution of Defects in Cold Chamber High Pressure Die Casting
    Lu, Jingzhou
    Lordan, Ewan
    Zhang, Yijie
    Fan, Zhongyun
    Dou, Kun
    LUBRICANTS, 2025, 13 (03)
  • [28] High Pressure Die Casting and Gravity Die Casting of Aluminium Alloys: A Technical and Economical Study
    Kasliwal, Navin
    Bagale, Tammaraya
    ADVANCES IN MANUFACTURING TECHNOLOGY XXXI, 2017, 6 : 561 - 566
  • [29] The Influence of Intensification Pressure on the Gate Microstructure of AlSi3MgMn High Pressure Die Castings
    Otarawanna, Somboon
    Gourlay, Christopher M.
    Laukli, Hans I.
    Dahle, Arne K.
    LIGHT METALS TECHNOLOGY 2009, 2009, 618-619 : 607 - +
  • [30] Manufacturing of High Pressure Die Casting Die Inserts Using SLM
    Stolt, Roland
    Jarfors, Anders E. W.
    SPS2020, 2020, 13 : 663 - 671
12345