STUDY ON IMPROVING ACCURACY OF PULL-OUT YIELD STRENGTH EVALUATION OF MORTISE-TENON (KOMISEN) JOINTS IN TRADITIONAL WOODEN BUILDINGS

被引：0
作者：
Aoki K. [1 ]
Sugino M. [2 ]
Hayashi Y. [2 ]
机构：
[1] Takenaka Corporation, Japan
[2] Kyoto University, Japan
来源：
Journal of Structural and Construction Engineering | 2023年 / 88卷 / 807期
关键词：
EYTFormula; Finite Element Analysis; Komisen Joint; Static Loading Tests; Traditional Wooden Building;
D O I：
10.3130/aijs.88.814
中图分类号：
学科分类号：
摘要：
We conducted pull-out experiments on test pieces that imitated "komisen" joints of traditional wooden buildings and examined the fracture mechanism and conducted material tests on the test piece sets based on the fracture mode observed in the pull-out experiment to obtain basic data on the material properties. In addition, we evaluated the yield strength by the existing EYT formula and compared with the experimental results, and considered the applicability of the existing formula. Also, we constructed two-dimensional FEM models that simulate the pull-out fracture of the joints and compared the experimental results with the analysis results. © 2023 Architectural Institute of Japan. All rights reserved.
引用
收藏
页码：814 / 825
页数：11
相关论文
共 17 条
  • [1] Design Manual for Engineered Timber Joints, (2009)
  • [2] Fukuyama H., Inayama M., Iwasaki T., Analysis on Wood Dowel Double-shear Joint Using Regression Calculation for Material Characteristics of Dowels Based on Their Specific Gravity, Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, Structure III, pp. 319-320, (2008)
  • [3] Van der Put T., Leijten A., Evaluation of perpendicular to grain failure of beams caused byconcentrated loads of joints, Proceedings of 33rd Meeting of CIB-W18, (2000)
  • [4] Matsumoto T., Takiyama N., Hayashi Y., Experimental Study on Structural Properties of Column-to-Beam (Sasihgamoi) Joint, Journal of Structural and Construction Engineering (Transactions of AIJ), 77, 675, pp. 747-754, (2012)
  • [5] JIS Z 2101 Mokuzai-noshikenhouhou (Wood test method), (2009)
  • [6] Nakai T., Yamai R., The Mechanical Properties of 35 Important Japanese Woods, Bulletin of the Forestry and Forest Products Research Institute, 319, pp. 13-46, (1982)
  • [7] Standard for Structural Design of Timber Structures, (2006)
  • [8] Noguchi M., Nakamura N., Failure Criterion of Block Shear Strength of Timber Parallel to the Grain, Journal of Structural and Construction Engineering (Transactions of AIJ), 75, 658, pp. 2205-2212, (2010)
  • [9] Iwasaki K., Yasumura M., Estimating Fracture Strength of Timber Joints Loaded Perpendicular to Wooden Grain - Proposal for Fracture Parameter, Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, Structure III, pp. 273-274, (2005)
  • [10] Shibuya I., Matsudome S., Maekawa H., Fujita K., Experimental Study on the Performance Evaluation Method of Pegged, Mortise and Tenon Joint, Journal of Structural and Construction Engineering (Transactions of AIJ), 601, pp. 99-104, (2006)
12