UV surface treatment of polycarbonate for adhesion improvement to liquid silicone rubber (LSR)

被引：0

作者：

Hartung M. ^{[1
]}

Nikousaleh M. ^{[1
]}

Rüppel A. ^{[1
]}

Giesen R.-U. ^{[1
]}

Heim H.-P. ^{[1
]}

机构：

[1] Institut für Werkstofftechnik/Kunststofftechnik, Universität Kassel, Mönchebergstraße 3, Kassel

来源：

Zeitschrift Kunststofftechnik/Journal of Plastics Technology | 2019年 / 2019卷 / 01期

关键词：

Adhesion; LSR; Polycarbonate; Surface activation; UV irradiation;

D O I：

10.3139/O999.04022019

中图分类号：

学科分类号：

摘要：

The adhesion of self-adhesive liquid silicone rubbers to thermoplasts is only possible for a few selected material combinations without a surface pretreatment. A UV pretreatment is effective for polycarbonate and short irradiation periods are sufficient. To clarify the required irradiation conditions that result in an improvement of adhesion, the varying irradiation conditions were assessed. FTIR-ATR spectroscopy was used for surface analysis to characterize the change in the polymer surface. © Carl Hanser Verlag.

引用

页码：188 / 209

页数：21

共 33 条

[1]

Franssen O., Bayerl H., Die Erfolgsgeschichte Der Siliconelastomere GAK, 7, pp. 462-466, (2012)

[2]

Wurst S., Weigelt M., Flexibilität bei Hart-Weich-Verbindungen, Kunststoffe, 9, pp. 38-43, (2003)

[3]

Delebecq E., Hermeline N., Flers A., Et al., Looking over Liquid Silicone Rubbers (2) Mechanical Properties Vs Net-Work Topology ACS Applied Materials & Interfaces 4, 7, pp. 3353-3363, (2012)

[4]

Seitz V., Arzt K., Mahnel S., Et al., Improvement of adhesion strength of self-adhesive silicone rubber on thermoplastic substrates-Comparison of an atmospheric pressure plasma jet (APPJ) and a Pyrosil® flame, International Journal of Adhesion and Adhesives, 66, pp. 65-72, (2016)

[5]

Awaja F., Gilbert M., Kelly G., Et al., Adhesion of polymers, Progress in Polymer Science 34, 9, pp. 948-968, (2009)

[6]

Noeske M., Degenhardt J., Strudthoff S., Et al., Plasma jet treatment of five polymers at atmospheric pressure, Surface Modifications and the Relevance for Adhesion International Journal of Adhesion and Adhesives 24, 2, pp. 171-177, (2004)

[7]

Roth-Folsch A., Lodel T., Eine Frage Des Kontaktwinkels Kunststoffe, 12, pp. 37-39, (2011)

[8]

Factor A., Ligon W.V., May R.J., The role of oxygen in the photoaging of bisphenol A polycarbonate. 2, Gc/Gc/High-Resolution MS Analysis of Florida-Weathered Polycarbonate Macromolecules, 20, pp. 2061-2468, (1987)

[9]

Rivaton A., Mailhot B., Soulestin J., Et al., Influence of the chemical structure of polycarbonates on the contribution of crosslinking and chain scissions to the photothermal ageing, European Polymer Journal 38, 7, pp. 1349-1363, (2002)

[10]

Adams M.R., Garton A., Surface modification of bisphenol-A-polycarbonate by far-UV radiation, Part I: In Vacuum Polymer Degradation and Stability, 41, pp. 265-273, (1993)

← 1 2 3 4 →