Adaptive Filtering and Feature Extraction of Ultrasonic Signal Based on FPGA

被引：0

作者：

Liu S. ^{[1
,2
]}

Wei J. ^{[1
,2
,3
]}

Zhang C. ^{[1
,2
]}

Jin L. ^{[1
,2
]}

Yang Q. ^{[1
]}

机构：

[1] State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology, Tianjin

[2] Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province, Hebei University of Technology, Tianjin

[3] State Grid Hebei Electric Power Supply Co. Ltd, Huanghua Power Supply Branch, Cangzhou

来源：

Diangong Jishu Xuebao/Transactions of China Electrotechnical Society | 2020年 / 35卷 / 13期

关键词：

Adaptive filtering; Empirical mode decomposition; Feature extraction; FPGA; Ultrasonic characteristic signals;

D O I：

10.19595/j.cnki.1000-6753.tces.190572

中图分类号：

学科分类号：

摘要：

Aiming at the nonlinear and non-stationary characteristics of electromagnetic ultrasonic characteristic signals, there are problems that traditional noise reduction components and features are difficult to extract. A data processing algorithm for adaptive filtering of electromagnetic ultrasonic signals and the empirical mode decomposition (EMD) method is proposed. Firstly, the stability evaluation of the ultrasonic signal is carried out. On this basis, the adaptive ultrasonic filtering is used to denoise the electromagnetic ultrasonic signal. The adaptive filtering integrated into the EMD is more sensitive to the unique frequency noise. The EMD is used to decompose the fluctuating time and frequency at different time scales. The information and the noise frequency components involved are used to realize the feature extraction. The reconstruction of the ultrasonic signal after EMD denoising can eliminate the frequency aliasing phenomenon, and realize the real-time noise reduction and feature extraction of the electromagnetic ultrasonic signal based on FPGA. The basis for further defect identification and defect assessment and portability has been laid. Finally, the experimental study on aluminum plates with microcracks and plastic damage was carried out, and the effectiveness of the method was verified. The method has the characteristics of high signal-to-noise ratio, real-time extraction of time-frequency information and less loss of effective information, and can effectively identify defects in the aluminum plate. © 2020, Electrical Technology Press Co. Ltd. All right reserved.

引用

页码：2870 / 2878

页数：8

共 21 条

[1]

Wang Shujuan, Kang Lei, Li Zhichao, Et al., 3-D finite element analysis and optimum design of electromagnetic acoustic transducers, Proceedings of the CSEE, 29, 30, pp. 123-128, (2009)

[2]

Ashigwuike E C, Ushie O J, Mackay R, Et al., A study of the transduction mechanisms of electromagnetic acoustic transducers (EMATs) on pipe steel materials, Sensors and Actuators A: Physical, 229, pp. 154-165, (2015)

[3]

Sun Wenxiu, Liu Guoqiang, Xia Hui, Et al., Numerical simulation and experimental study of electromagnetic acoustic transducer receiving process in nonferromagnetic material, Transactions of China Electrotechnical Society, 33, 19, pp. 4443-4449, (2018)

[4]

Liu Suzhen, Li Libin, CaiZhichao, Et al., The Design for electromagnetic interference eliminating circuits in electromagnetic ultrasonic testing systems, Transactions of China Electrotechnical Society, 31, 1, pp. 80-84, (2016)

[5]

Talebhaghighi Z, Bazzazi F, Sadr A., Design and Simulation of Ultrasonic Denoising Algorithm Using Wavelet Transform and ICA, The 2nd International Conference on Computer & Automation Engineering, 1, pp. 739-743, (2010)

[6]

Liang Ziqian, XuanWenbo, Wang Ting, Et al., Eddy current NDT for the cracks of girth welds of pipes based on 2D impedance characteristics, Chinese Journal of Scientific Instrument, 38, 9, pp. 54-61, (2017)

[7]

Wang Kaican, XuJi, ZhaiGuofu, Defect identification method for aluminum plate based on electromagnetic acoustic technique, Journal of Zhejiang University: Engineering Science, 48, 11, pp. 2031-2038, (2014)

[8]

Nan Gangyang, Wang Qiwu, Zhang Zhenzhen, Et al., Rail steel flaw inspection based on laser ultrasonic method, Infrared and Laser Engineering, 6, 1, pp. 132-137, (2017)

[9]

LuJingxiang, Liu Guoqiang, Noise reduction in magneto-acousto-electrical NDT using analytic wavelet thresholding, 2017 IEEE 3rd Information Technology and Mechatronics Engineering Conference (ITOEC), pp. 585-588, (2017)

[10]

Cao Jianshu, LuoZhenxing, JiBaoping, Laser ultrasonic signal processing by differential aloorithm in special pipeline thickness measurement, Optics and Precision Engineering, 25, 5, pp. 1197-1205, (2017)

← 1 2 3 →