Complex saturation of titanium alloys with boron, chromium and titanium

被引：0
作者：
Alexey G. [1 ,2 ]
Guriev M.A [2 ]
Ivanov S.G [3 ]
Quan Z. [1 ]
Shunqi M. [1 ]
机构：
[1] Hubei Digital Textile Equipment Key Laboratory, Wuhan Textile University, Wuhan
[2] Polzunov Altai State Technical University, Barnaul
[3] LLC Hardening Technologies, Barnaul
来源：
Solid State Phenomena | 2019年 / 298卷
关键词：
Boron; Boronizing; Chemical-thermal treatment; Chromium; Hardening; Titanium;
D O I：
10.4028/www.scientific.net/SSP.298.32
中图分类号：
学科分类号：
摘要：
This work described the technology of boronizing of titanium Grade2 from the generation of the gas phase directly in a sealed container during the decomposition reactions of the powder saturating medium. With such an implementation of the process in a closed volume, waste gas neutralization devices are not required, since the generation and decomposition of active saturating gases occurs in a closed volume. At saturation of titanium from the gas mixture, titanium borides, titanium nitrides, as well as titanium and chromium carbides can be produced in the coating. The microhardness of the coating is 2800-3200 HV0.1. The thickness of the diffusion coatings in this case can be up to75 microns. It is indicated that diffusion coatings on titanium by this technology should not exceed a thickness of more than 100 microns, and if the thickness of the diffusion coating exceeds 100 microns, the risk of chipping will increase. © 2019 Trans Tech Publications Ltd, Switzerland.
引用
收藏
页码：32 / 37
页数：5
相关论文
共 14 条
  • [1] Tyurnina Z.G., Tyurnina N.G., Formation of wear-resistant and corrosion-resistant coatings on titanium, Fiz. Khim. Stekla, 38, 6, pp. 905-909, (2012)
  • [2] Li C., Li M.S., Zhou Y.C., Improving the surface hardness and wear resistance of Ti3SiC2 by boronizing treatment, Surf. Coat. Technol, 201, pp. 6005-6011, (2007)
  • [3] Liu Lizhi, Surface hardening of titanium alloys by gas phase nitridation under kinetic control, (2005)
  • [4] Zhabrev V.A., Sviridov S.I., Lapis N.D., Sulejmanova N.A., Lopatina N.P., (1995)
  • [5] Ivanov S.G., Guriev A.M., Starostenkov M.D., Ivanova T.G., Levchenko A.A., Special features of preparation of saturating mixtures for diffusion chromoborating, Russian Physics Journal, 57, 2, pp. 266-269, (2014)
  • [6] Ivanov S.G., Garmaeva I.A., Guriev M.A., Guriev A.M., Starostenkov M.D., Features of multicomponent saturation alloyed by steels, Lecture notes in control and information sciences, 22, pp. 49-53, (2015)
  • [7] Guryev A.M., Kozlov E.V., Zhdanov A.I., Ignatenko L.I., Popova I.A., Transformation of the phase composition and the mechanism of transition region structuring in a ferrite-pearlite steel subjected to thermal-cycling borating, Russian Physics Journal, 44, 2, pp. 183-188, (2001)
  • [8] Garmaeva I.A., Guriev A.M., Ivanova T.G., Et al., Comparative study of saturating power bonding media of different composition, Letters on Materials, 6, 4, pp. 262-265, (2016)
  • [9] Gur'ev A.M., Ivanov S.G., Gur'ev M.A., Et al., Chemicothermal treatment of tool materials, Steel in Translation, 45, 8, pp. 555-558, (2015)
  • [10] Guriev A.M., Ivanov S.G., Ligdenov B.D., Zemljakov S.A., Vlasova O.A., Kosheleva E.A., Guriev M.A., (2007)
12