Influence of cooling path on solidification morphology and hot tearing susceptibility of an Al−Cu−Fe−Mg−Si alloy

被引：0
|
作者：
Zhou, B. [1 ]
Apel, M. [1 ]
Eiken, J. [1 ]
Berger, R. [1 ]
Gor, S. [2 ]
Wolff, N. [2 ]
机构：
[1] Access e. V., Intzestraße 5, Aachen,52072, Germany
[2] RWTH Aachen University, Foundry Institute, Intzestraße 5, Aachen,52072, Germany
来源：
Materialwissenschaft und Werkstofftechnik | 2024年 / 55卷 / 01期
关键词：
In this work; a numerical approach is applied to study the impact of local cooling conditions on the hot tearing in an aluminium-copper alloy with iron; magnesium and silicon as impurities. At first; CALPHAD-coupled multicomponent and multiphase-field simulations were performed to elucidate the effect of cooling conditions on solidification morphology in the final; critical stage of solidification. Then; the evolution of the melt flow permeability is derived from the simulated three-dimensional microstructures and discussed in the context of the Rappaz-Drezet-Gremaud criterion for hot tearing susceptibility. With increasing cooling rates; the microstructure becomes finer and the resulting permeability first increases and then saturates within the investigated range. It is shown that the Rappaz-Drezet-Gremaud hot-tearing criterion in combination with microstructure simulations responds to different cooling conditions in contrast to a Scheil-Gulliver based model or an evaluation of the average Kou-index. © 2024 Wiley-VCH GmbH;
D O I：
10.1002/mawe.202300167
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：53 / 61
相关论文
共 50 条
  • [31] Effect of cooling rate on solidification parameters and microstructure of Al-7Si-0.3Mg-0.15Fe alloy
    Chen, Rui
    Shi, Yu-feng
    Xu, Qing-yan
    Liu, Bai-cheng
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (06) : 1645 - 1652
  • [32] Influence of Fe and Si impurities on the quench sensitivity of Al-Zn-Mg-Cu alloy
    Zhang, X.-M. (xmzhang_cn@yahoo.cn), 1600, Beijing Institute of Aeronautical Materials (BIAM)
  • [33] Direct observation of hot tearing of Al-7%Si-0.35%Mg alloy
    Yamagata, Hiroshi
    Tachibana, Hiroshi
    Kijima, Shuya
    Adachi, Mitsuru
    Koiwai, Shuji
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2018, 4 (03) : 480 - 492
  • [34] Hot tearing of ternary Mg−Al−Ca alloy castings
    G. Cao
    S. Kou
    Metallurgical and Materials Transactions A, 2006, 37 : 3647 - 3663
  • [35] Relationship between amounts of low-melting-point eutectics and hot tearing susceptibility of ternary Al−Cu−Mg alloys during solidification
    HAN J.-Q.
    WANG J.-S.
    ZHANG M.-S.
    NIU K.-M.
    Transactions of Nonferrous Metals Society of China (English Edition), 2020, 30 (09): : 2311 - 2325
  • [36] Hot Tearing Susceptibility of Binary Mg-Gd Alloy Castings and Influence of Grain Refinement
    Luo, Shifeng
    Yang, Guangyu
    Zou, Zhen
    Ouyang, Shuxia
    Xiao, Lei
    Jie, Wanqi
    ADVANCED ENGINEERING MATERIALS, 2018, 20 (08)
  • [37] Hot tearing susceptibility of binary Mg-Y alloy castings
    Wang, Zhi
    Huang, Yuanding
    Srinivasan, Amirthalingam
    Liu, Zheng
    Beckmann, Felix
    Kainer, Karl Ulrich
    Hort, Norbert
    MATERIALS & DESIGN, 2013, 47 : 90 - 100
  • [38] Effect of La on hot cracking susceptibility of Al-Cu-Mg alloy
    Tao, Chengchuang
    Yuan, Xiaoguang
    Liu, Jian
    Huang, Hongjun
    Zuo, Xiaojiao
    Zheng, Wentao
    MATERIALS RESEARCH EXPRESS, 2019, 6 (10):
  • [39] Quality index and hot tearing susceptibility of Al-7Si-0.35Mg-xCu alloys
    Taghiabadi, R.
    Fayegh, A.
    Pakbin, A.
    Nazari, M.
    Ghoncheh, M. H.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2018, 28 (07) : 1275 - 1286
  • [40] Melt Cooling Rate Effect on the Microstrucutre of Al–Si Alloy Doped with Mg, Mn, Fe, Ni, and Cu
    O. V. Gusakova
    S. V. Gusakova
    V. G. Shepelevich
    Physics of Metals and Metallography, 2022, 123 : 500 - 506
12345