Solid waste management by RDF production from landfilled waste to renewable fuel of Nonthaburi

被引：0
作者：
Rahothan U. [1 ]
Khemkhao M. [1 ]
Kaewpengkrow P.R. [1 ,2 ]
机构：
[1] Rattanakosin College for Sustainable Energy and Environment, Rajamangala University of Technology Rattanakosin, Nakhon Pathom
[2] Department of Chemistry, Faculty of Science, King Mongkut’s Institute of Technology Ladkrabang, Bangkok
来源：
International Journal of Renewable Energy Development | 2023年 / 12卷 / 05期
关键词：
landfill mining; Landfill waste; RDF; Renewable energy; Sustainable energy; Waste management; Waste to energy;
D O I：
10.14710/IJRED.2023.52956
中图分类号：
学科分类号：
摘要：
A worldwide increase in waste production and energy demand as the world's population grows and consumes more resources: therefore, sustainable waste management strategies are important. The goal of this work is to research the guidelines for the appropriate RDF production and landfill waste management of the Nonthaburi province, Thailand. Refuse Derived Fuel (RDF) produced from landfilled Waste (LW) in Nonthaburi was investigated the physicochemical. The following procedure has implemented for the production of LW to RDF of 25 tons/hr of LW; (i) the LW was placed in a pre-shredder, which was followed by a primary crusher; (ii) metals were removed from the waste stream using a magnetic separator; (iii) the LW was transferred using a conveyor belt to a dynamic disc screen, where recyclable waste was separated into smaller sizes less than 80 mm.; (iv) the waste passed through an air separator to reject high-density materials (soil and glass); (v) the undesired material were separated manually, and (vi) the desired material were baled. RDF composition consisted of 78.16-67.93% plastics, 2.29-4.34% rubber, 1.27% wood, 1.53-2.19 % textile, and other (soil-like material) 12.19-26.72%. The proximate and elemental analysis of RDF was determined according to the ASTM method. The moisture content was reduced, and the heating value increased to 18.08-29.41 MJ/kg. The results suggested high carbon and low nitrogen content suitable for energy conversion. The separation can effectively convert LW to RDF, which can be applied as an alternative fuel. Therefore, RDF can contribute to a more sustainable and circular economy. © 2023.The Author(s).
引用
收藏
页码：968 / 976
页数：8
相关论文
共 39 条
  • [1] Andre R., Margarida S., Carlos C., Andre M., Jorge A., Candida V., Joana C., Waste-to-Energy Technologies Applied for Refuse Derived Fuel (RDF) Valorisation, International Conference on Innovation, Engineering and Entrepreneurship, (2018)
  • [2] Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis, (2022)
  • [3] Bialowiec A., Pulka J., Stepien P., Manczarski P., Golaszewski J., The RDF/SRF torrefaction: An effect of temperature on characterization of the product – Carbonized Refuse Derived Fuel, Waste Management, 70, pp. 91-100, (2017)
  • [4] Cifrian E., Galan B., Andres A., Viguri J. R., Material flow indicators and carbon footprint for MSW management systems: Analysis and application at regional level, Cantabria, Spain, Resources, Conservation and Recycling, 68, pp. 54-66, (2012)
  • [5] Cheela V. R. S., John M., Dubey B., Quantitative determination of energy potential of refuse derived fuel from the waste recovered from Indian landfill, Sustainable Environment Research, 31, 1, (2021)
  • [6] Dastjerdi B., Strezov V., Kumar R., Behnia M., An evaluation of the potential of waste to energy technologies for residual solid waste in New South Wales, Australia, Renewable and Sustainable Energy Reviews, 115, (2019)
  • [7] De Gisi S., Chiarelli A., Tagliente L., Notarnicola M., Energy, environmental and operation aspects of a SRF-fired fluidized bed waste-to-energy plant, Waste Management, 73, pp. 271-286, (2018)
  • [8] Duangjaiboon K., Kitiwan M., Kaewpengkrow P. R., Co-pelletization of Industrial Sewage Sludge and Rice Straw: Characteristics and Economic Analysis, International Journal of Renewable Energy Development, 10, 3, (2021)
  • [9] 2021 Solid recovered fuels — Methods for the determination of biomass content
  • [10] Fayad M. A., Abed A. M., Omran S. H., Jaber A. A., Radhi A. A., Dhahad H. A., Yusaf T., Influence of Renewable Fuels and Nanoparticles Additives on Engine Performance and Soot Nanoparticles Characteristics, 11, 4, (2022)
1234