Optomechanical structure design and experiment of high-resolution video camera for micro-nano satellite(Invited)

被引：0
作者：
Zhang L. [1 ]
Shao M. [1 ]
Xue Z. [1 ]
Cong S. [1 ]
Liu J. [1 ]
Sun M. [1 ]
Zheng X. [1 ]
Liu J. [1 ]
机构：
[1] Chang Guang Satellite Technology Co., Ltd., Changchun
来源：
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2021年 / 50卷 / 10期
关键词：
Camera structure; Mechanical performance; Micro-nano remote sensing satellite; Optomechanical integrated optimization; Spaceborne video camera;
D O I：
10.3788/IRLA20210477
中图分类号：
学科分类号：
摘要：
The design, assembly and experiment of the optomechanical system of a compact spaceborne video camera developed for the 20 kg micro-nano optical remote sensing satellite were introduced, and the integrated optimization method was also proposed. The camera was a Cassegrain optical system including two mirrors and one corrector assembly. In order to obtain the best thermal stability, the mirrors were made of silicon carbide. Firstly, based on the task and overall design of 20 kg micro-nano video satellite, the requirements of video camera were proposed; Then, the optical and optomechanical structure system of the video camera were introduced respectively; In order to further improve the lightweight rate, while meeting the requirements of optical performance, the optomechanical integration optimization method was used to the lightweight design. After optimization, the mass of the optomechanical system was only 3.03 kg, the weight of the whole camera was only 4.76 kg, and the 1st mode was larger than 120 Hz; Finally, the assembly and ground mechanical experiments of the camera were summarized. The results showed that the camera had very dynamic properties and stability. © 2021, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
引用
收藏
相关论文
共 20 条
  • [1] Jeong S, Nam W J, Ahn K B., Et al., Slewing mirror telescope optics for the early observation of UV/optical photons from gamma-ray bursts, Optics Express, 21, 2, pp. 2263-2278, (2013)
  • [2] Shi Rong, Li Xiao, Deng Ke, Development situation of micro-nano satellite and its application in optical reconnaissance, Aerospace Electronics Warfare, 32, 1, pp. 8-13, (2016)
  • [3] Ma Dingkun, Kuang Yin, Yang Xinquan, Et al., Development actual state and trends of Nano-satellite [J], Space Electronic Technology, 25, 225, pp. 45-48, (2017)
  • [4] Ye Zhao, Li Xiwei, Wang Chao, Et al., Survey of Technological development of optical payload for micro-nano satellite, Spacecraft Engineering, 25, 6, pp. 122-130, (2016)
  • [5] Fan Bin, Chen Xu, Li Bicen, Et al., Technical innovation of optical remote sensing payloads onboard GF-5 satellite, Infrared and Laser Engineering, 46, 1, (2017)
  • [6] Li Beibei, Han Bing, Tian Tian, Et al., Application status and future development of jilin-1 video satellite, Satellite Application, 75, 3, pp. 25-29, (2018)
  • [7] Shao Mengqi, Zhang Lei, Li Lin, Et al., Optimization design of supporting backplate for ultra-light space camera, Acta Optica Sinica, 39, 3, pp. 333-340, (2019)
  • [8] Zhang Lei, Ke Shanliang, Li Lin, Et al., Multi-objective integrated optimization design of Φ210 mm ultra-light SiC mirror, Acta Photonica Sinica, 46, 12, pp. 83-91, (2017)
  • [9] Liu Ju, Xue Jun, Ren Jianyue, Review of research on integration design of structural thermal and optical analysis with key technique of space camera, Journal of Astronautics, 2, 30, pp. 423-429, (2009)
  • [10] Tumarina M, Ryazanskiy M, Jeong S, Et al., Design, fabrication and space suitability tests of wide field of view, ultra-compact, and high resolution telescope for space application, Optics Express, 26, 3, (2018)
12