Experimental Study of Three-dimensional Cracks Propagation Characteristics Under Uniaxial Compression

被引：0
|
作者：
Sun X. [1 ]
Zhang B. [1 ,2 ]
Yin D. [1 ]
Shen B. [1 ]
机构：
[1] State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao
[2] School of Architecture and Civil Engineering, Liaocheng University, Liaocheng
来源：
Yingyong Jichu yu Gongcheng Kexue Xuebao/Journal of Basic Science and Engineering | 2019年 / 27卷 / 04期
关键词：
3D cracks; AE characteristics; Computerized tomography and reconstructionWong R H; Propagation; Rock bridge angles;
D O I：
10.16058/j.issn.1005-0930.2019.04.017
中图分类号：
学科分类号：
摘要：
A series of uniaxial compressive tests were carried out on the rock-like brittle specimens with two parallel pre-existing three-dimensional(3D) cracks to investigate cracks spatial propagation and AE characteristics in 3D.AE monitoring technique and computerized tomography and reconstruction were used to assist the investigation.Three rock bridge failure modes were observed in the surface of specimens:anti-wing crack and wing crack failure mode, anti-wing crack and shear crack failure mode, wing cracks parallel propagation.Clear turning points were observed obviously in stress-strain curve which were caused by Mode I initiation and the rock bridge coalescence when the AE signals reached a peak value.The initiation energy of wing cracks is proportional to the loading time.Wing cracks were the dominant fractures, followed by a great number of shear cracks and secondary cracks.The number of shear cracks and secondary cracks was increased with different rock bridge angles between the pre-existing cracks, the failure modes were complicated.The wing cracks have an anti-symmetrical structure with the crack center line as the symmetry axis.The initiation angle of wing cracks increased with the depth into the specimens.With different rock bridge angles between the pre-existing cracks, the rock bridge failure can be divided into three modes:complete failure with anti-wing cracks and wing cracks; partial failure with anti-wing cracks and shear cracks; and partial failure with wing cracks parallel propagation. © 2019, The Editorial Board of Journal of Basic Science and Engineering. All right reserved.
引用
收藏
页码：890 / 905
页数：15
相关论文
共 20 条
  • [11] Guo Y., Zhu W., Experimental study on three-dimensional(3-D) propagation from a pre-existing ellipse flaw under compression-shearing, Chinese Journal of Solid Mechanics, 32, 1, pp. 64-73, (2011)
  • [12] Guo Y., Lin C., Zhu W., Et al., Experimental research on propagation and coalescence process of three-dimensional flaw-sets, Chinese Journal of Rock Mechanics and Engineering, 27, pp. 3191-3195, (2008)
  • [13] Fu J., Zhu W., Cao G., Et al., Experimental study and numerical simulation of propagation and coalescence process of a single three-dimensional flaw in rocks, Journal of China Coal Society, 38, 3, pp. 411-417, (2013)
  • [14] Fu J., Zhu W., Xie F., Et al., Experimental studies and elasto-brittle simulation of propagation and coalescence process of two three-dimensional flaws in rocks, Rock and Soil Mechanics, 34, 9, pp. 2489-2495, (2013)
  • [15] Li T., CT testing analysis and theoretical study on propagation of penny shaped 3-D fractures under compression, (2005)
  • [16] Li T., Lu H., CT real-time scanning tests on single crack propagation under triaxial compression, Chinese Journal of Rock Mechanics and Engineering, 29, 2, pp. 89-296, (2012)
  • [17] Shen B., Mechanics of Fractures and Intervening Bridges in Hard Rocks, (1993)
  • [18] Fairhurst C.E., Hudson J.A., Suggested methods for determining the uniaxial compressive strength and deformability of rock materials-ISRM Suggested Methods, Chinese Journal of Rock Mechanics and Engineering, 19, 6, pp. 802-808, (2000)
  • [19] Cheng J., Zhao S., Fracture Mechanics, (2006)
  • [20] Yun T.S., Jeong Y.J., Kim K.Y., Et al., Evaluation of rock anisotropy using 3D X-ray computed tomography, Engineering Geology, 163, pp. 11-19, (2013)
12