Early fault feature extraction of rolling bearing based on optimized VMD and improved threshold denoising

被引：0

作者：

Chen P. ^{[1
]}

Zhao X. ^{[1
,2
,3
]}

机构：

[1] College of Electrical and Information Engineering, Lanzhou University of Technology, Lanzhou

[2] Gansu Provincial Key Lab of Advanced Control for Industrial Processes, Lanzhou

[3] National Experimental Teaching Center of Electrical and Control Engineering, Lanzhou

来源：

Zhendong yu Chongji/Journal of Vibration and Shock | 2021年 / 40卷 / 13期

关键词：

Fault diagnosis; Feature extraction; Threshold de-noising; Variational modal decomposition (VMD); Whale optimization algorithm (WOA);

D O I：

10.13465/j.cnki.jvs.2021.13.019

中图分类号：

学科分类号：

摘要：

Aiming at the problem of early fault signals of rolling bearing being weak to cause fault feature extraction being difficult under complex working conditions and strong background noise interference, a method of rolling bearing fault feature extraction based on optimized variational mode decomposition (VMD) and improved threshold denoising was proposed. Firstly, VMD was optimized using the whale optimization algorithm (WOA) to realize the adaptive decomposition of vibration signal, and the optimal modal components selection criteria for L-kurtosis and correlation coefficient were established. Then, the improved threshold denoising was performed on the selected optimal components. Finally, Hilbert envelope spectral analysis was performed on the de-noised signals to realize fault feature frequency extraction. The proposed method was verified to adopt simulated signals and the engineering data set of University of Western Reserve in US. At the same time, the proposed method was compared with Teager energy operator denoising method and the optimization method based on envelope entropy criterion. The results showed that the effect of the proposed method is better. © 2021, Editorial Office of Journal of Vibration and Shock. All right reserved.

引用

页码：146 / 153

页数：7

共 22 条

[11] DRAGOMIRETSKIY K, ZOSSO D., Variational mode decomposition, IEEE Transactions on Signal Processing, 62, 3, pp. 531-544, (2014)
[12] WANG Y, MARKERT R, XIANG J, Et al., Research on variational mode decomposition and its application in detecting rub-impact fault of the rotor system, Mechanical Systems and Signal Processing, 60, 61, pp. 243-251, (2015)
[13] WANG Fengtao, LIU Chenxi, ZHANG Tao, Et al., Fault diagnosis method of rolling bearing based on k-value optimization VMD, Journal of Vibration, Measurement and Diagnosis, 38, 3, pp. 540-547, (2018)
[14] LIAN J, LIU Z, WANG H, Et al., Adaptive variational mode decomposition method for signal processing based on mode characteristic, Mechanical Systems and Signal Processing, 107, pp. 53-77, (2018)
[15] TANG Guiji, WANG Xiaolong, Application of parameter optimization variational mode decomposition method in early fault diagnosis of rolling bearing, Journal of Xi'an Jiaotong University, 49, 5, pp. 73-81, (2015)
[16] LIU Jianchang, QUAN He, YU Xia, Et al., Fault diagnosis of rolling bearing based on parameter optimization VMD and sample entropy, Journal of Automation, 12, 12, pp. 1-12, (2019)
[17] YAN Xiao'an, JIA Minping, Application of CSA-VMD and optimal scale morphological slice bispectrum in enhancing outer race fault detection of rolling element bearings, Mechanical Systems and Signal Processing, 122, pp. 56-86, (2019)
[18] MIRJALILI S, LEWIS A., The whale optimization algorithm, Advances in Engineering Software, 95, pp. 51-67, (2016)
[19] HOSKING J R M., L-moments:Analysis and estimation of distributions using linear combinations of order statistics[J], Journal of the Royal Statistical Society, 52, 1, pp. 105-124, (1990)
[20] LIU S, HOU S, HE K, Et al., L-Kurtosis and its application for fault detection of rolling element bearings, Measurement, 116, pp. 523-532, (2018)

← 1 2 3 →