The error compensation method of the low-speed wind tunnel flow temperature based on the thermocouple

被引：0
|
作者：
Yang Z. [1 ]
Gu Z. [1 ]
Zhang W. [1 ]
Zeng X. [1 ]
机构：
[1] Facility Design and Instrumentation Institute of China Aerodynamics Research and Development Center, Mianyang
来源：
Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument | 2022年 / 43卷 / 05期
关键词：
Heat conduction error; Low-speed airflow; Radiation error; Thermocouple;
D O I：
10.19650/j.cnki.cjsi.J2108335
中图分类号：
学科分类号：
摘要：
The quality of flow temperature data in the low-speed wind tunnel is the key to the character of the flow field of the wind tunnel. This article carries out special research on the compensation method of thermal conductivity error and radiation error in thermocouple measurement. Based on the basic principles of heat transfer, research is implemented on the method of the thermal conductivity error compensation with the fixed value of the immersed length of the thermocouple wire and the method of the radiation error compensation with the fixed value of relative change rate of the surrounding temperature. Simulation results of the quantitative relationship between the immersed length of the thermocouple, the relative change rate of the surrounding temperature, and temperature error are obtained. To evaluate the error mechanism analysis and simulation results, a wind tunnel validation test is carried out. Test results show that the measured thermocouple immersion error results are consistent with the theoretical simulation results, and the relative change rate of surrounding temperature ω<1 can significantly reduce the influence of temperature measurement radiation error, which can reduce the influence of temperature measurement radiation error on temperature uniformity by 7.12 times. The method presented in this article provides useful exploration and technical basis for the engineering application of the thermocouple in gas medium. © 2022, Science Press. All right reserved.
引用
收藏
页码：68 / 76
页数：8
相关论文
共 23 条
  • [1] OU Q F, XIAO J B, CHEN Y F, Et al., Full-scene measurement and analysis of helicopter blade flaps based on vision, Chinese Journal of Scientific Instrument, 42, 1, pp. 146-156, (2021)
  • [2] LIU D X, TAN Q X, WANG X G, Et al., Design of static pressure tube for precision air static pressure measurement based on orthogonal test design method, Chinese Journal of Scientific Instrument, 35, 2, pp. 360-367, (2014)
  • [3] YANG SH L, ZHOU Q, XU K J., Dynamic decoupling-compensation for bar-shaped wind tunnel strain gauge balance, Chinese Journal of Scientific Instrument, 12, 7, pp. 1598-1605, (2011)
  • [4] YANG ZH X, GU ZH H, ZENG X, Et al., Study on dynamic characteristics evaluation method of the cascade thermocouple system, Chinese Journal of Scientific Instrument, 41, 11, pp. 74-81, (2020)
  • [5] CUI Y X, XUE SH Y, ZHOU T, Et al., Fabrication and performance analysis of thin film transient temperature sensor, Chinese Journal of Scientific Instrument, 38, 12, pp. 3028-3035, (2017)
  • [6] WU P, LIN T., Research on identification modeling of sheathed thermocouple sensor based on hybrid QGA-SVM, Chinese Journal of Scientific Instrument, 35, 2, pp. 343-349, (2014)
  • [7] ZENG X H, QI L H, XIAO Y, Et al., Droplet temperature measurement and calculation during spray process, Chinese Journal of Scientific Instrument, 32, 1, pp. 93-98, (2011)
  • [8] CHEN Z, WEI X L, LI T., Experimental investigation on flame characterization and temperature profile of single/multiple pool fire in cross wind, Journal of Thermal Science, 30, pp. 324-332, (2021)
  • [9] WANG H Y, WANG H, SHI Y L, Et al., An aerothermodynamics measuring technique for shock interactions in hypersonic low-density flow, Journal of Astronautics, 41, 12, pp. 1525-1532, (2020)
  • [10] ZOU X F, PAN K, YAN Q, Et al., Overview of dynamic strength of hypersonic vehicle structure in multi-field coupling environment, Aeronautical Science and Technology, 31, 12, pp. 3-15, (2020)
123