Research on Finite Element Simulation and Parameters Optimization of Milling 7050-T7451 Aluminum Alloy Thin-walled Parts

被引：1

作者：

Yang S. ^{[1
,3
]}

Yin T. ^{[2
]}

Wang F. ^{[3
]}

机构：

[1] Industrial Technology Center, North China Institute of Aerospace Engineering, Hebei, Langfang

[2] College of Mechanical and Transportation Engineering, China University of Petroleum (Beijing), Beijing

[3] College of Mechanical Engineering, Tianjin University of Technology and Education, Tianjin

来源：

Recent Patents on Engineering | 2022年 / 16卷 / 01期

关键词：

finite element simulation; high-speed milling; machining deformation; parameters optimization; Thin-walled parts of aluminum alloy;

D O I：

10.2174/1872212114999200902153633

中图分类号：

学科分类号：

摘要：

Background: Thin-walled parts of aluminum alloy are easy to occur in machining deformation due to the characteristics of thin wall, low rigidity, and complex structure. Objective: To reduce and control the machining deformation, it is necessary to select reasonable machining parameters. Methods: The influence of milling parameters on the milling forces, milling temperature, and machining deformation was analyzed through the established model based on ABAQUS. Then, the corresponding empirical formula was obtained by MATLAB, and parameter optimization was carried out as well. Besides, a lot of patents on machining thin-walled parts were studied. Results: The results showed that the prediction error of milling forces is about 15%, and 20% of milling temperature. In this case, the optimized milling parameters are as follows: ap=1 mm, ae=0.1 mm, n=12 000 r/min, and f=400 mm/min. It is of great significance to reduce the machining deformation and improve the machining quality of thin-walled parts. © 2022 Bentham Science Publishers.

引用

页码：82 / 93

页数：11

共 25 条

[1]

Yang Y.H., Guo J.Y., Yu C., Analysis to the Influ-ences of Cutting Force to Machining Deformation of a Ti-tanium Alloy Thin-wall Tube, Adv. Mat. Res, 366, pp. 510-513, (2012)

[2]

Lu X H, Ruan F X, Hou P R, Luan Y H, Zhang J, Ren Z J, A prediction method of micro-milling force of milling of thin-walled based on cutting process simulation, (2019)

[3]

Arnaud L., Gonzalo O., Sebastien S., Simulation of low rigidity part machining applied to thin-walled struc-tures, Int. J. Adv. Manuf. Technol, 54, pp. 479-488, (2011)

[4]

Zhang W H, Wan M, Dang X B, Yang H, Gao T Q, Fast prediction method of milling stability of thin-walled parts, (2019)

[5]

Izamshah R., Mo J.P.T., Ding S., Hybrid deflection prediction on machining thin-wall monolithic aerospace components, Proc Inst Mech Eng B J Eng Manuf, 226, 4, pp. 592-605, (2012)

[6]

Qiao K., Shu X.P., Integration of Machining Error Prediction and Compensation for Thin-walled Work-piece, Chin. Mech. Eng, 26, pp. 2895-2900, (2015)

[7]

Wu Y J, A method of overall milling precision control for thin-walled parts, (2018)

[8]

Jun W., Soichi I., Atsushi M., A cutting sequence optimization algorithm to reduce the workpiece deformation in thin-wall machining, Prec. Eng.-", J. Inter. Soc. Prec. Eng. Nanotechnol, 50, pp. 506-514, (2017)

[9]

Lin W.Q., Shi F., Feng Z.J., Peng H.W., Research on Deformation Control and Real Time Monitoring of Aero-nautical Thin-walled Part Cutting Machining, Mach. Tool Hydr, 23, pp. 89-92, (2017)

[10]

Ijaz H., Zain M., Saleem W., A numerical approach on parametric sensitivity analysis for an aeronautic aluminium alloy turning process, Mechanika, 22, pp. 149-155, (2016)

← 1 2 3 →