Experimental Study on Flexural Performance of UHPC Joint Beams with Tooth Block and Bolted Connection

被引：0
作者：
Zhang Y. [1 ]
Shi J. [2 ]
Shao X. [1 ]
机构：
[1] College of Civil Engineering, Hunan University, Changsha
[2] CCECC Fuzhou Survey & Design Institute Co Ltd, Fuzhou
来源：
Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences | 2019年 / 46卷 / 03期
基金：
中国国家自然科学基金;
关键词：
Bolted connection; Creep; Epoxy glue; Steel subplate; Tooth block; Ultra-High Performance Concrete(UHPC);
D O I：
10.16339/j.cnki.hdxbzkb.2019.03.002
中图分类号：
学科分类号：
摘要：
To investigate the flexural performance of precast UHPC joint beams with tooth block and bolted connection, flexural test was performed on six UHPC joint beams with tooth block and bolted connection(joint beams for short) and two UHPC beams without joints. The effects of bottom-longitudinal reinforcement, steel subplate, and epoxy glue setting on joint on the failure mode, flexural strength, mid-span deflection, top-bottom-side strain of connecting steel plate and joint top-bottom-side longitudinal relative displacement of these joint beams were discussed. The effect of UHPC creep under long-time compressive stress on the pre-tightening force of bolt was analyzed by finite element software ANSYS. The results show two failure modes of UHPC joint beams with different reinforcement ratio of bottom-longitudinal reinforcement, one of which is flexural rupture of UHPC section in the region where flexural rigidity is changed, and the other is joint failure caused by wedge-shaped failure of tooth block. The effect of joint-painted epoxy glue on the flexural behavior of joint beams is negligible, and steel subplate setting on the side of joint can not only increase the flexural strength of joint and flexural performance of connecting plate, but also reduce the mid-span deflection of joint beams and joint top-bottom-side longitudinal relative displacement. The UHPC creep under long-time compressive stress can reduce the pre-tightening force of bolt by 24.7%. © 2019, Editorial Department of Journal of Hunan University. All right reserved.
引用
收藏
页码：10 / 17
页数：7
相关论文
共 16 条
  • [1] Pierre R., Marcel C., Composition of reactive powder concretes, Cement and Concrete Research, 25, 7, pp. 1501-1511, (1995)
  • [2] Bayard O., Ple O., Fracture mechanics of reactive powder concrete: material modeling and experimental investigations, Engineering Fracture Mechanics, 70, 7, pp. 839-851, (2003)
  • [3] Matte V., Moranville M., Durability of reactive powder composites: influence of silica fume on the leaching properties of very low water/binder pastes, Cement and Concrete Composites, 21, pp. 1-9, (1999)
  • [4] Tang M.G., High performance concrete-past, present and future, ASTM Proceeding of 1st International Symposium on Ultra High Performance Concrete, pp. 3-9, (2004)
  • [5] Cheyrezy M., Mierostmetuml analysis of RPC, Cement and Concrete Research, 25, 7, pp. 1491-1500, (1995)
  • [6] Burkart I., Muller H.S., Creep and shrinkage characteristics of ultra high strength concrete (UHPC), Proceedings of the Second International Symposium on Ultra High Performance Concrete, pp. 469-476, (2008)
  • [7] Yen L.V., Patrick C.A., Thomas A.J.T., Design and construction of a 50m single span ultra-high performance ductile concrete composite road bridge, International Journal of Sustainable Construction Engineering & Technology, 3, 1, pp. 1-17, (2012)
  • [8] Huh S., Byun Y., Sun Y., Pedestrian arch bridge, Seoul, Korea, Structural Engineering International, 15, 1, pp. 32-34, (2005)
  • [9] Zhang C., Joint design and model tests of extra- long- span continuous box girder bridge composed of UHPC, (2014)
  • [10] Shao X.D., Zhang L., Zhang S.T., Et al., Study on structural forms of external prestressing anchorage for a noval continuous UHPC box-gieder bridge, Journal of Hunan University(Natural Sciences), 43, 3, pp. 1-7, (2016)
12