Research on the method of synchronous extraction of 3D surface deformation based on UAV LiDAR point cloud

被引：0

作者：

Zhan X. ^{[1
]}

Zhou D. ^{[1
]}

An S. ^{[2
]}

Zhan S. ^{[2
]}

Diao X. ^{[1
]}

机构：

[1] School of Environment and Spatial Informatics, China University of Mining and Technology, Jiangsu, Xuzhou

[2] Anhui Coal Mine Green and Low-carbon Development Engineering Research Center, Ping'an Coal Mining Engineering Technology Research Institute Co., Ltd., Anhui, Huainan

来源：

Zhongguo Kuangye Daxue Xuebao/Journal of China University of Mining and Technology | 2023年 / 52卷 / 06期

关键词：

connected domain segmentation; registration; rigid body point cloud; three-dimensional surface deformation; UAV-LiDAR;

D O I：

10.13247/j.cnki.jcumt.20220284

中图分类号：

学科分类号：

摘要：

The surface subsidence is a three-dimensional movement process synchronized in time and space, and the traditional monitoring process is to separate the subsidence and horizontal movement. This processing method brings errors and cannot reflect the synchronization of deformation. Based on the UAV-LiDAR point cloud, this paper proposes a rigid point cloud transformation method to simultaneously extract the three-dimensional movement deformation of the ground surface. The main steps include: connecting domain segmentation of LiDAR point cloud to obtain ground feature point cloud; The ground feature point cloud is regarded as rigid body, FPFH combined with ICP algorithm was used to register the rigid body point cloud, and 3D ground point movement was extracted according to the transformation matrix; The M3C2 algorithm was used to correct the registration error. Take a Wangjiata coal mine of Ordos as an example to apply and evaluate the accuracy. The results show that: the maximum surface subsidence caused by mining is 2. 723 m, and the maximum horizontal movement in X and Y directions is 0. 65 and 0. 75 m, respectively. The internal coincidence accuracy of the three-dimensional surface deformation is 57 mm, while the deformation error corrected by the M3C2 algorithm is 41 mm, and the accuracy is increased by 28%. Compared with the measured deformation values of RTK-GPS, the deformation errors in X, Y and Z directions are 56, 83 and 36 mm. Therefore, it is feasible to extract 3D deformation based on point cloud segmentation and registration. © 2023 China University of Mining and Technology. All rights reserved.

引用

页码：1241 / 1250

页数：9

共 27 条

[11] ZHOU Wentao, ZHANG Wenjun, MIAO Junyi, Et al., 3D surface deformation monitoring of mining areas based on HVCE-RBFNN method[J], Journal of Geodesy and Geodynamics, 42, 5, pp. 520-525, (2022)
[12] MATWIJ W, GRUSZCZYNSKI W, PUNIACH E, Et al., Determination of underground mining-induced displacement field using multi-temporal TLS point cloud registration [J], Measurement, 180, (2021)
[13] JASKULSKI M, NOWAK T., Transformations of landscape topography of the Betchatow Coal Mine (central poland) and the surrounding area based on DEM analysis [J], ISPRS International Journal of Geo-Information, 8, 9, (2019)
[14] JIA Lingang, ZHANG Huaxing, LIU Pengliang, The control impact of filling pace on surface movement and deformation characteristics[J], Journal of China University of Mining &-Technology, 51, 4, pp. 642-650, (2022)
[15] AISSOU B, AISSA A B., An adapted connected component labeling for clustering non-planar objects from airborne LIDAR point cloud, The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 43, pp. 191-195, (2020)
[16] ELSEBERG J, BORRMANN D, NUCHTER A., One billion points in the cloud: An octree for efficient processing of 3D laser scans [J], ISPRS Journal of Photogrammetry and Remote Sensing, 76, pp. 76-88, (2013)
[17] HE L, CHAO Y, SUZUKI K, Et al., Fast connected-component labeling[J], Pattern Recognition, 42, 9, pp. 1977-1987, (2009)
[18] LEI H, JIANG G, QUAN L., Fast descriptors and correspondence propagation for robust global point cloud registration, IEEE Transactions on Image Processing, 26, 8, pp. 3614-3623, (2017)
[19] YUAN M, LI X, CHENG L, Et al., A coarse-to-fine registration approach for point cloud data with bipartite graph structure [J], Electronics Newsweekly, 11, 2, (2022)
[20] YUE X, LIU Z, ZHU J, Et al., Coarse-fine point cloud registration based on local point-pair features and the iterative closest point algorithm[J], Applied Intelligence, 52, 11, pp. 12569-12583, (2022)

← 1 2 3 →