Effects of melamine pyrophosphate on mechanical and flame retardant properties of bamboo fiber/polypropylene composites

被引:0
作者
Tang Q. [1 ,2 ]
Ren Y. [1 ,2 ]
Wang G. [3 ]
Cheng H. [3 ]
Guo W. [1 ,2 ]
机构
[1] Research Institute of Forestry New Technology, Chinese Academy of Forestry, Beijing
[2] Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing
[3] International Center of Bamboo and Rattan, Beijing
来源
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2020年 / 37卷 / 03期
关键词
Bamboo fiber; Composites; Flame retardancy; Mechanical properties; Melamine pyrophosphate;
D O I
10.13801/j.cnki.fhclxb.20190611.006
中图分类号
学科分类号
摘要
The melamine pyrophosphate (MPP) was introduced into bamboo fiber/polypropylene (BF/PP) mats as flame retardant to prepare a series of MPP-BF/PP composites. The effects of MPP mass fractions on mechanical properties, microstructures of MPP-BF/PP composites were investigated by mechanical test and SEM. The flame retardancy, thermal stability and water resistance of MPP-BF/PP composites were studied using limiting oxygen index (LOI), thermal gavimetric (TG) and water absorption as index. The results show that the bending strength and impact strength of the MPP-BF/PP composites increase firstly and then show a decreased trend when the mass fraction of MPP is less than 30wt%. As the mass fraction of MPP increases up to 5wt%, the bending strength and impact strength of MPP-BF/PP composites reach the optimal values. MPP distributes evenly in the MPP-BF/PP composites, but the surface roughness of cross section increases with the mass fraction of MPP increasing, which means the interface compatibility between MPP and PP becomes worse, reducing the mechanical properties of MPP-BF/PP composites. The results of LOI indicate that the flame retardancy of MPP-BF/PP composites is enhanced with the mass fraction of MPP increasing. When the mass fraction of MPP reaches to 30wt%, the LOI is 24.3%. TG test reveals that the addition of MPP enhances the thermal decomposition temperature and char residues of MPP-BF/PP composites, contributing to the flame retardancy. The test of water resistance of MPP-BF/PP composites indicates that the water absorption and thickness swelling values are almost not affected by the mass fraction of MPP when less than 20wt%. According to fuzzy comprehensive evaluation, the MPP-BF/PP composites will achieve the optimal properties when the mass fraction of MPP is 10wt%. © 2020, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.
引用
收藏
页码:553 / 561
页数:8
相关论文
共 27 条
[1]  
Tang Q.H., Wang Y.F., Ren Y.P., Et al., A novel strategy for the extraction and preparation of bamboo fiber-reinforced polypropylene composites, Polymer Composites, 40, 6, pp. 2178-2186, (2019)
[2]  
Gao L., Tang Q.H., Chen Y.P., Et al., Investigation of novel lightweight phenolic foam-based composites reinforced with flax fiber mats, Polymer Composites, 39, 6, pp. 1809-1817, (2018)
[3]  
Li Y., Mai Y.W., Ye L., Sisal fiber and its composites: A review of recent developments, Composites Science and Technology, 60, 11, pp. 2037-2055, (2000)
[4]  
Li J.J., Zhang M.A., Yang G.C., Et al., Property study of sisal fiber composite backrest-chairs, Fiber Reinforced Plastics/Cmposites, 4, pp. 29-31, (1999)
[5]  
Kumari R., Ito H., Takatani M., Et al., Fundamental studies on wood/cellulose-plastic composites: Effects of composition and cellulose dimension on the properties of cellulose/PP composite, Journal of Wood Science, 53, 6, pp. 470-480, (2007)
[6]  
Yang X.T., Gao L., Guo W.J., Effect of fire retardant treatment with ammonium polyphosphateon wood/jute/polypropylene fiber composites for automotive interior trims, China Wood Industry, 29, 5, pp. 10-13, (2015)
[7]  
Zhang C.A., Zhang Y.F., Zeng J.C., Study on ramie noil fiber reinforced PP composite, Fiber Reinforced Plastics/Composites, 5, (2001)
[8]  
Li H.B., Shen S.P., Guo J.G., A modified shear-lag model for stress transfer in bamboo fiber/matrix composites, Acta Materiae Compositae Sinica, 35, 8, pp. 2252-2259, (2018)
[9]  
Zhou C., Yu W.P., Yao W.B., Et al., Model construction of natural rubber bamboo fiber elastomer and its influencing factors, Journal of Forestry Engineering, 3, 6, pp. 43-47, (2018)
[10]  
Xian X.J., Xian D.G., The relationship of microstructure and mechanical properties of bamboo, Journal of Bamboo Research, 9, 3, pp. 10-23, (1990)