Consolidation Characteristics and Bearing Behavior of Sand Pile Composite Foundation in Caisson Heightening

被引：0
作者：
Chen P. [1 ]
Pan Y. [1 ]
Liang F. [2 ]
Li D. [1 ]
机构：
[1] Key Laboratory of Large-Span Bridge Construction Technology of the Ministry of Transport, CCCC Second Harbor Engineering Company Limited, Wuhan
[2] Department of Geotechnical Engineering, Tongji University, Shanghai
来源：
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University | 2021年 / 55卷 / 06期
关键词：
Area ratio; Bearing capacity; Composite foundation; Consolidation; Sand pile; Stress ratio;
D O I：
10.16183/j.cnki.jsjtu.2020.058
中图分类号：
学科分类号：
摘要：
To study the influence of consolidation on the bearing capacity of the composite foundation in the process of caisson heightening, the consolidation characteristics of the sand pile composite foundation in the process of caisson heightening are discussed based on the sand pile composite foundation engineering of a large-scale onshore caisson foundation. The influence of loading duration and replacement rate of the sand pile are analyzed. Based on the area ratio method of pile-soil and the pile-soil stress ratio method, the formula of the ultimate bearing capacity of the sand pile composite foundation considering the consolidation effect is derived, which is compared with the measured value of the ultimate bearing capacity of the foundation. The results show that the time history curves of the bearing capacity of the composite foundation based on the two methods are close, and the initial bearing capacity is less than the measured value of bearing capacity, while the bearing capacity after consolidation is 68% and 80% higher than the natural strength of the composite foundation. This method considers the influence of consolidation on the bearing capacity of the foundation in the process of caisson heightening. It can avoid the problem of stagnant sinking of open caisson as it underestimates the actual bearing capacity of the foundation, and provides suggestions for calculation of ultimate bearing capacity of the composite foundation considering the influence of consolidation and formulating the reasonable construction scheme of open caisson. © 2021, Shanghai Jiao Tong University Press. All right reserved.
引用
收藏
页码：707 / 715
页数：8
相关论文
共 27 条
  • [1] ZHU Jianmin, GONG Weiming, MU Baogang, Et al., Bottleneck problem study on first stage sinking of super-large caisson, Highway, 56, 4, pp. 13-18, (2011)
  • [2] XU Zenghui, Calculation of composite foundation's bearing capacity by high replacement ratio sand compacted pile in soft clay, Port& Waterway Engineering, 6, pp. 131-135, (2011)
  • [3] MU Baogang, WANG Yan, ZHU Jianmin, Et al., Analysis of large caisson sinking measured resistance, Journal of Civil, Architectural & Environmental Engineering, 34, pp. 107-115, (2012)
  • [4] ZHANG Ling, ZHAO Minghua, Study on bearing capacity calculation method of discrete material pile composite foundation, Journal of Hunan University (Natural Sciences), 34, 6, pp. 10-14, (2007)
  • [5] YAN Shuwang, LI Jia, LIN Shu, Et al., Bearing capacity analysis of cohesive soil foundation considering the increase of soil strength, Rock and Soil Mechanics, 37, pp. 629-634, (2016)
  • [6] MUNFAKAH G A, SARKAR S K, CASTELLI R J., Performance of a test embankment founded on stone columns, Proceedings of the International conference on advances in piles and ground treatment for foundations, pp. 259-265, (1983)
  • [7] HAN J, YE S L., Settlement analysis of buildings on the soft clays stabilized by stone columns, Proceedings of the International Conference on Soil Improvement and Piles Foundations, pp. 446-451, (1992)
  • [8] ZHANG Hong, Research and practice of open cai-sson foundation of long span bridge, (2016)
  • [9] XIE Kanghe, ZENG Guoxi, Consolidation theories for drain wells under equal strain condition, Chinese Journal of Geotechnical Engineering, 11, 2, pp. 3-17, (1989)
  • [10] SHEN Zhujiang, YI Jindong, Comparison of models in deformation analysis of beach soft ground under embankment, Chinese Journal of Geotechnical Engineering, 6, 6, pp. 39-45, (1987)
123