Study on the application of the weld reinforcement variation coefficient in underwater wet welding quality evaluation

被引：0
|
作者：
Du Y. [1 ,3 ]
Guo N. [1 ,2 ]
Wu C. [1 ,2 ]
Huang L. [1 ,2 ]
Zhang X. [1 ,2 ]
Feng J. [1 ,2 ]
机构：
[1] Shandong Provincial Key Laboratory of Special Welding Technology, Harbin Institute of Technology at Weihai, Weihai
[2] State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin
[3] Institute of Ocean graphic Instrumentation, Shandong Academy of Science, Qingdao
来源：
Hanjie Xuebao/Transactions of the China Welding Institution | 2020年 / 41卷 / 02期
关键词：
Underwater wet welding; Variation coefficient; Weld reinforcement; Welding quality;
D O I：
10.12073/j.hjxb.20190917001
中图分类号：
学科分类号：
摘要：
There is a lack of an evaluation index which can assess the appearance of welds user-friendly and accurately in underwater wet welding. To solve this problem, the weld reinforcement variation coefficient is proposed to be used for evaluating the welding quality. The evaluation index has many advantages such as objective, quantitative, less step and easy operation, which is suitable for popularization and application in practical engineering production. The weld reinforcement variation coefficient grows higher with the worse the uniformity of weld appearance and the lower the welding quality and vice versa. According to the influence of pulse current on the stability of welding process, welding was carried out under different pulse frequency conditions. In view of the influence of wire feeding method on welding process, the stability of underwater wet flux-cored wire welding process was studied by analyzing the wire feeding method with the coefficient of variation of residual high welding seam. The experimental results show that the evaluation results of the index have high consistency with welding quality. The influences of the welding process on the weld reinforcement variation coefficient are analyzed using an X-ray transmission method. The reliability of the weld reinforcement variation coefficient is further verified by researching the welding electrical signal and droplet transfer. © 2020, Editorial Board of Transactions of the China Welding Institution, Magazine Agency Welding. All right reserved.
引用
收藏
页码：24 / 27and32
页数：2708
相关论文
共 16 条
  • [1] Rogalski G, Fydrych D, Labanowski J, Et al., Underwater wet repair welding of API 5L X65M pipeline steel, Polish Maritime Research, 24, 6, pp. 188-194, (2017)
  • [2] Chen H, Guo N, Shi X, Et al., Effect of hydrostatic pressure on protective bubble characteristic and weld quality in underwater flux-cored wire wet welding, Journal of Materials Processing Technology, 259, 9, pp. 159-168, (2018)
  • [3] Li H, Liu D, Yan Y, Et al., Effects of heat input on arc stability and weld quality in under water wet flux-cored arc welding of E40 steel, Journal of Manufacturing Processes, 31, 1, pp. 833-843, (2018)
  • [4] Pratikno H, Effect of underwater welding in marine environment and surface welding to mechanical properties of steel weld joint, Applied Mechanics and Materials, 862, 1, pp. 308-314, (2017)
  • [5] Chen H, Guo N, Shi X, Et al., Effect of water flow on the arc stability and metal transfer in underwater flux-cored wet welding, Journal of Manufacturing Processes, 31, 1, pp. 103-115, (2018)
  • [6] Yohanes P, Nurul M, Triyono, Effect of water depth on the microstructure and mechanical properties of SS400 steel in underwater welding, Key Engineering Materials, 772, 7, pp. 128-132, (2018)
  • [7] Wang J, Sun Q, Jiang Y, Et al., Analysis and improvement of underwater wet welding process stability with static mechanical constraint support, Journal of Manufacturing Processes, 34, 6, pp. 238-250, (2018)
  • [8] Aleksandr S, Chang Y, Igor A, Identification welding parameters using complex criteria of quality, China Welding, 26, 4, pp. 1-9, (2017)
  • [9] He Jie, Feng Yuehai, Zhang Lin, Et al., Research on microstructure and mechanical properties of high strength Al-Mg alloy fabricated by double-wire and gas tungsten arc additive manufacturing process, Transactions of the China Welding Institution, 40, 7, pp. 109-113, (2019)
  • [10] Meng Fanjun, Zhu Sheng, Cao Yong, Et al., Fuzzy synthesis estimation of bead surface quality for pulse MAG welding prototyping, Transactions of the China Welding Institution, 29, 7, pp. 25-28, (2008)
12