Numerical Study on Pressure Pulsation Characteristics of Liquid LBE Medium Axial-Flow Pump

被引：0

作者：

Wang Y. ^{[1
]}

Yu H. ^{[1
]}

Guo Y. ^{[2
]}

Yan M. ^{[1
]}

Sui H. ^{[1
]}

Zhang Y. ^{[1
]}

Ren Y. ^{[1
]}

机构：

[1] Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute of China, Chengdu

[2] Lanzhou University of Technology, Lanzhou

来源：

Hedongli Gongcheng/Nuclear Power Engineering | 2020年 / 41卷 / 03期

关键词：

Axial-flow pump; Hydraulic performance; Lead-bismuth eutectic medium (LBE); Physical parameters; Pressure fluctuation;

D O I：

10.13832/j.jnpe.2020.03.0202

中图分类号：

学科分类号：

摘要：

Base on the Reynolds time averaged N-S equation and Renormalization group (RNG) k-ε two equation turbulence model, this paper studies and analyzes the hydraulic performance and the pressure fluctuation distribution characteristics of the axial-flow LBE pump in room temperature, clear water and liquid LBE. The results show that: for the hydraulic design of the axial-flow pump completed according to hydraulic design method of clear water medium and relevant empirical coefficient, under the condition of LBE medium, the head and the efficiency of the pump are improved, the head increases obviously with the increasing of the flow, and the phenomenon of flow separation in the inner boundary layer of the pump is obviously weakened under the LBE medium. The main frequency of the pressure coefficient fluctuation at the inlet monitoring point of the pump impeller is 81hz, which is equal to the blade rotation frequency, and the second frequency harmonic occurs at two and three times of the blade frequency; the medium viscosity does not affect the pressure fluctuation coefficient amplitude at the inlet of the impeller, and the medium density, that is, the inertial force, is linearly positively related to the pressure fluctuation amplitude at the inlet of the pump impeller. © 2020, Editorial Board of Journal of Nuclear Power Engineering. All right reserved.

引用

页码：202 / 207

页数：5

共 8 条

[1] KNIERIM C, BAUMGARTEN S, FRITZ J., Design process for an advanced reactor coolant pump for a 1400MW nuclear power plant, Journal of Fluids Engineering-transactions of The ASME, pp. 1-7, (2005)
[2] BAUMGARTEN S, BRECHT B, BRUHNS U., Reactor coolant pump type RUV for wetinghouse reactor for AP1000, Proceeding of ICPP10, pp. 10339-10348, (2010)
[3] CHO Y, KIM Y, CHO S., Advancement of reactorcoolant pump (rcp) performance verification test in KAERI 2014, Proceedings of the 2014 22nd International Conference on Nuclear Engineering ICONE, 22, pp. 1-6, (2014)
[4] 9, pp. 19-24
[5] 8
[6] 4
[7] 2
[8] ZHANG M L, SHEN Y M., Three-dimensional simulation of meandering river based on 3-D RNG κ-ɛ turbulence model, Journal of Hydrodynamics, 20, 4, pp. 448-455, (2008)

← 1 →