Effect on Pressure Generation Characteristics by Arc in Oil-filled Closed Tank

被引：0
|
作者：
Chong Z. [1 ]
Lu L. [2 ]
Zhou Y. [3 ]
Wu J. [4 ]
Liu Y. [5 ]
Li Y. [3 ]
机构：
[1] State Grid Corporation of China, Beijing
[2] State Grid Smart Grid Research Institute Co., Ltd., Beijing
[3] State Key Laboratory of Control and Simulation of Power System and Generation Equipments, Department of Electrical Engineering, Tsinghua University, Beijing
[4] State Grid Economic and Technological Research Institute Co., Ltd., Beijing
[5] Shandong Power Equipment Co., Ltd., Jinan
来源：
Gaodianya Jishu/High Voltage Engineering | 2023年 / 49卷 / 09期
关键词：
AC turret; arc energy; arc power; full-scale simulation test; power-frequency AC arc; pressure generation characteristics; transformer;
D O I：
10.13336/j.1003-6520.hve.20231018
中图分类号：
学科分类号：
摘要：
Transformer plays an important role in UHV transmission system. The overvoltage caused by arc faults in oil tank makes it possible for transformer to arouse explosion accident, which seriously threatens the safety and stability of the power grid. To explore the effect and law of arc characteristics on pressure generation caused by large current arc fault, the arc fault simulation tests were carried out under the conditions of different models of oil tank, currents, and electrode gaps, and the tests were based on the full-scale arc fault simulation test platform on AC turret of transformers, which is first domestically developed. During the tests, the pressure data on AC turret are collected, and the time-domain curve of pressure on the AC turret under different electrode gaps and different currents and the numerical relationship between the peak pressure inside the turret and the arc discharge power are presented. The study provides experimental and theoretical basis for the design of elevated seats for explosion prevention, promoting the development of transformer explosion prevention design technology. © 2023 Science Press. All rights reserved.
引用
收藏
页码：3876 / 3886
页数：10
相关论文
共 30 条
  • [21] MULLER S, BRADY R, DE BRESSY G, Et al., Prevention of transformer tank explosion: part 1-experimental tests on large transformers, ASME 2008 Pressure Vessels and Piping Conference, (2008)
  • [22] LIU Zehong, LU Licheng, ZHOU Yuanxiang, Et al., Research on pressure characteristics of AC turret on arc fault, Proceedings of the CSEE, 41, 13, pp. 4688-4697, (2021)
  • [23] HAN Ruoyu, LI Liuxia, QIAN Dun, Et al., Exploding metal wires in liquids: current situation and prospects, High Voltage Engineering, 47, 3, pp. 766-777, (2021)
  • [24] SHI Huantong, FAN Yunfei, YIN Guofeng, Et al., Experimental study on underwater electrical explosion of copper wires with varied diameter and length, High Voltage Engineering, 47, 7, pp. 2599-2606, (2021)
  • [25] LI Longnu, ZHANG Yaqian, LI Yan, Et al., Calculation and analysis of short-circuit current of split-winding transformer with stabilizing winding, Proceedings of the CSU-EPSA, 31, 3, pp. 69-75, (2019)
  • [26] HE Jinliang, ZHANG Bo, ZENG Rong, Et al., Grounding system design of 1000 kV ultra-high voltage substation, Proceedings of the CSEE, 29, 7, pp. 7-12, (2009)
  • [27] ZHANG Bingqian, XIAN Richang, YU Yang, Et al., Analysis of physical characteristics of power transformer windings under inter-turn short circuit fault, High Voltage Engineering, 47, 6, pp. 2177-2185, (2021)
  • [28] YAN Chenguang, ZHANG Baohui, HAO Zhiguo, Et al., Modeling and simulation of pressure characteristics of power transformer tanks’ internal faults, Proceedings of the CSEE, 34, 1, pp. 179-185, (2014)
  • [29] YAN Chenguang, HAO Zhiguo, ZHANG Baohui, Et al., Modeing and simulation of power transformer tank deformation and rupture, Transactions of China Electrotechnical Society, 31, 3, pp. 180-187, (2016)
  • [30] SHANG Zhenqiu, Drawing and application of ac arc energy calculation curve, Journal of Xi’an Jiaotong University, 1, pp. 81-95, (1963)
123