Analysis and optimization of temperature field uniformity of proton exchange furnace

被引：0
|
作者：
Fu N. [1 ]
Zhang X. [1 ]
机构：
[1] School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing
来源：
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics | 2019年 / 45卷 / 04期
关键词：
LiNbO[!sub]3[!/sub] waveguides; Numerical simulation; Proton exchange furnace; Temperature field; Uniformity;
D O I：
10.13700/j.bh.1001-5965.2018.0350
中图分类号：
学科分类号：
摘要：
Aimed at the problem of temperature field uniformity of proton exchange furnace, combined with the structural characteristic of the furnace, temperature control algorithm was developed based on FLUENT user-defined function (UDF). Based on this, various heating and temperature control schemes were proposed. The FLUENT software was used to simulate temperature field of the furnace under different schemes. The relationship between the temperature field uniformity and the placement of the sensor and the height of the heating wire under different temperature control methods was analyzed to find the best scheme. The results show that the temperature field uniformity is best when three temperature controllers are used, the positions of three sensors are respectively arranged in the middle of three heating wires, and the height of heating wire is arranged 4 times the length of the uniform temperature zone. The maximum temperature deviation in the uniform temperature zone is 0.03℃. For a given structure of the vertical furnace, increasing the height of the heating wire and optimizing the design of the sensor layout and temperature control method of the furnace body can improve the temperature field uniformity. This method provides ideas for optimizing temperature field uniformity of the same type of electric heating furnace. © 2019, Editorial Board of JBUAA. All right reserved.
引用
收藏
页码：735 / 742
页数：7
相关论文
共 15 条
  • [1] Fakhri M.A., Al-Douri Y., Hashim U., Et al., Optical investigation of nanophotonic lithium niobate-based optical waveguide, Applied Physics B, 121, 1, pp. 107-116, (2015)
  • [2] Cao L., Aboketaf A., Wang Z.H., Et al., Hybrid amorphous silicon(a-Si: H)-LiNbO<sub>3</sub> electro-optic modulator, Optics Communications, 330, pp. 40-44, (2014)
  • [3] Fakhri M.A., Al-Douri Y., Hashim U., Et al., Annealing temperature effects on morphological and optical studies of nano and micro photonics lithium niobate using for optical waveguide applications, Australian Journal of Basic & Applied Sciences, 9, 12, pp. 128-133, (2015)
  • [4] Shen L., He J.J., Yang C.H., Et al., Temperature uniformity control of large-scale vertical quench furnaces for aluminum alloy thermal treatment, IEEE Transactions on Control Systems Technology, 24, 1, pp. 24-39, (2015)
  • [5] Emadi A., Saboonchi A., Taheri M., Et al., Heating characteristics of billet in a walking hearth type reheating furnace, Applied Thermal Engineering, 63, 1, pp. 396-405, (2014)
  • [6] Ling Z., Chen J., Fang X., Et al., Experimental and numerical investigation of the application of phase change materials in a simulative power batteries thermal management system, Applied Energy, 121, pp. 104-113, (2014)
  • [7] Pang L., Wang M., Wang W., Et al., Optimal thermal design of a stacked mini-channel heat sink cooled by a low flow rate coolant, Entropy, 15, 11, pp. 4716-4731, (2013)
  • [8] Tang J.P., ANSYS FLUENT 16.0 Super Study Manual, pp. 502-507, (2016)
  • [9] Chicatelli A., Hartley T.T., Cole G., Et al., Interdisciplinary modeling using computational fluid dynamics and control theory, American Control Conference, 3, pp. 3438-3443, (1994)
  • [10] Yang Y., Reuter M.A., Harman D.T.M., CFD modelling for control of hazardous waste incinerator, Control Engineering Practice, 11, 1, pp. 93-101, (2003)
12