Stability of Mechanical Properties of Super-fine NiTi Shape Memory Alloy Wires Under Different Cyclic Training Conditions

被引：0
作者：
Yang B. [1 ]
Qian H. [1 ]
Shi Y. [1 ]
Kang L. [1 ]
机构：
[1] School of Civil Engineering, Zhengzhou University, Zhengzhou
来源：
Cailiao Daobao/Materials Reports | 2022年 / 36卷 / 04期
基金：
中国国家自然科学基金;
关键词：
Mechanical properties; Shape memory effect; Stability; Super-fine shape memory alloy wire; Superelasticity;
D O I：
10.11896/cldb.21010093
中图分类号：
学科分类号：
摘要：
The NiTi shape memory alloys (SMA) have been increasingly used in different domains, such as aerospace, automotive, robotic, and biomedical applications, for their unique properties. Among the developed SMA products, super-fine NiTi SMA wires have potential applications in structural health monitoring and micro-drive system due to their excellent shape memory effect, superelasticity and resistance characteristics, and so on. However, the stability of super-fine SMA wires is still a problem. Cyclic tensile tests of super-fine SMA wires (25 μm), which were martensite at room temperature, were conducted. The effects of the training process, cyclic loading-unloading numbers, and static treatment on the mechanical properties and stability of super-fine SMA wires were investigated. The mechanical parameters were analyzed with different trai-ning processes and cyclic loading-unloading numbers, such as residual strain, hysteretic energy, secant stiffness, and equivalent damping ratio. The results indicated that the detwinning process was shortened with the increase of training amplitudes and cyclic loading and unloading numbers, while austenitic mechanical properties were not affected. Methods for restoring mechanical properties of super-fine SMA wires after static treatment were proposed. The results of this paper can provide the experimental basis for the application of super-fine shape memory alloy wires in engineering. © 2022, Materials Review Magazine. All right reserved.
引用
收藏
相关论文
共 22 条
  • [1] Song G, Ma N, Li H N., Engineering Structures, 28, 9, (2006)
  • [2] Jie Yang, Yuehua Wu, Shape memory alloy and its application, (1993)
  • [3] Janke L, Czaderski C, Motavalli M, Et al., Materials and Structures/Materiaux et Constructions, 38, 279, (2005)
  • [4] Sellitto A, Riccio A., Materials, 12, 5, (2019)
  • [5] Lester B T, Baxevanis T, Chemisky Y, Et al., Acta Mechanica, 226, 12, (2015)
  • [6] Huang Haoyu, Zhang Wenshao, Journal of Vibration and Shock, 38, 18, (2019)
  • [7] Nahm S H, Kim Y J, Kim J M, Et al., Materials Science Forum, 475-479, (2005)
  • [8] Josephine S R D, Sunjai N S, Dhanalakshmi K., ISA Transactions, 53, 2, (2014)
  • [9] Lu Y, Zhang R, Xu Y, Et al., Materials, 13, 6, (2020)
  • [10] Cui Di, Li Hongnan, Song Gangbing, Journal of Building Materials, 11, 5, (2008)
123