SIMULATION ANALYSIS AND EXPERIMENTAL STUDY ON EXOTHERMIC PROCESS OF SOLID ACCUMULATOR

被引：0

作者：

Hu Z. ^{[1
]}

Duan Z. ^{[1
]}

Xu Y. ^{[2
]}

Shang X. ^{[1
]}

Xu J. ^{[2
]}

机构：

[1] School of Mechanical Engineering, Shenyang University of Technology, Shenyang

[2] Shenyang Huawei Engineering Technology Co.，Ltd., Shenyang

来源：

Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2023年 / 44卷 / 06期

关键词：

fluid structure interaction; heat storage; numerical simulation; solid thermal accumulator; thermal analysis;

D O I：

10.19912/j.0254-0096.tynxb.2022-0083

中图分类号：

学科分类号：

摘要：

In order to obtain the flow field distribution and flow characteristics of the heat release process of solid accumulator in practical engineering application，the heat release process of solid accumulator commonly used in engineering is taken as the research object，a method of heat fluid- structure coupling analysis with non- constant physical parameters is designed，and its feasibility is verified by numerical simulation and experiment. Using numerical simulation method based on the exothermic process of regenerative heat exchanger with the solid heat transfer characteristics are studied. The results show that in the first stage of the exothermic process, under the effect of low wind speed loop，the heating power is small, as the regenerator temperature Nu number is gradually reduced，and gradually tend to Nu value of the surface heat flow density，showing convective heat transfer characteristics of entrances. In the second stage of the exothermic process，the exothermic power is significantly increased due to the increase of wind speed. With the progress of the second stage，Nu number gradually increases and the convective heat transfer characteristics is high. © 2023 Science Press. All rights reserved.

引用

页码：71 / 77

页数：6

共 10 条

[1]

YANG X P，, YANG X X, YANG M L，, Et al., Recent advances in the study of solar energy high- temperature heat power generation and accumulation technologies［J］, Journal of engineering for thermal energy and power, 26, 1, pp. 1-6, (2011)

[2]

WANG Y, BAI F W，, WANG Z F., Investigated of heat transfer of high temperature air in honeycomb regenerator ［J］, Journal of engineering thermophysics, 32, 9, pp. 1541-1544, (2011)

[3]

DOROTHEA L, MICHAEL F，, Et al., Test results of concrete thermal energy storage for parabolic trough power plants［J］, Journal of solar energy engineering, 131, 4, (2009)

[4]

RAINER T，, DOERTE L，, DIETER S W., Advanced thermal energy storage technology for parabolic trough［J］, Journal of solar energy engineering, 126, 2, pp. 794-800, (2004)

[5]

SU J L, ZHANG Y R., Heat- storage simulation and experiments of a solid heat-storage type electric boiler［J］, Journal of engineering for thermal energy and power, 6, pp. 638-641, (2007)

[6]

XU Y Z, SHANG X D, Et al., Simulation analysis and experimental study on thermal storage process of solid heat storage device［J］, Acta energiae solaris sinica, 42, 3, pp. 401-405, (2021)

[7]

XU Y Z, SHANG X D, Et al., Heat analysis of regenerator based on non- fixed value physical characteristics of MgO brick［J］, Acta energiae solaris sinica, 42, 9, pp. 218-223, (2021)

[8]

XU Y Z，, SHANG X D，, SHAN Q, Et al., Research and application analysis of solid heat storage based on high rate heat storage［J］, Journal of engineering for thermal energy and power, 35, 10, pp. 72-78, (2020)

[9]

SONG X G, CAI L, ZHANG H., ANSYS fluid- structure interaction analysis and engineering example［M］, pp. 1-13, (2012)

[10]

MENG F C, DONG S J, JIANG H S，, Et al., A fast algorithm for long-term fluid-solid conjugate heat transfer process［J］, Journal of Beijing University of Aeronautics and Astronautics, 43, 6, pp. 1224-1230, (2017)

← 1 →