A METHOD TO EVALUATE TRANSMISSION EFFICIENCY OF GEAR REDUCER

被引：0
作者：
Yukawa T. [1 ]
机构：
[1] Dept. of Mechanical Science and Engineering, Faculty of Science and Engineering, Iwate University
来源：
International Journal of Mechatronics and Applied Mechanics | 2024年 / 2024卷 / 16期
关键词：
Gear Reducer; Identification; Transmission Efficiency;
D O I：
10.17683/ijomam/issue16.3
中图分类号：
学科分类号：
摘要：
This paper presents a method for determining the transmission efficiency of a gear reducer. The proposed method contains an identification theory to derive a dynamical model of motors. Using the identification theory, we propose a method to measure the torque transmission efficiency of the gear reducer. The identification theory is derived from the error between input and output data of the mathematical model of a target plant and actual time series data of the plant by an experiment. The dynamic characteristics of the gear reducer are calculated by identification theory for a system installing the motors. The target plant means a motor or a combined system consisting of the motor and the gear reducer. We discuss the torque constant as one parameter that determines motor characteristics. The torque constant value of the motor can be determined using the identification theory. Then, the torque transmission efficiency of the gear reducer can be decided by the torque constant value. In this paper, we first explain the algorithm of the identification theory, second discuss the results of identifying the motor torque constant, and finally examine the transmission efficiency of the gear reducer in the experiment. © 2024, Cefin Publishing House. All rights reserved.
引用
收藏
页码：24 / 32
页数：8
相关论文
共 14 条
  • [1] Tutunji Tarek A., DC Motor Identification using Impulse Response Data, EUROCON 2005, pp. 1734-1736, (2005)
  • [2] Dong Jianfei, van Wingerden Jan-Willem, Verhaegen Michel, LPV Subspace Identification of a DC motor with unbalanced disc, Proc. of the 15th IFAC Symposium on System Identification, pp. 856-861, (2009)
  • [3] Wu Wei, DC Motor Parameter Identification Using Speed Step Responses, Modelling and Simulation in Engineering, 2012, pp. 1-5, (2012)
  • [4] Othman Kama Azura, Kamal Mahanijah Md, Mamat Nasirah, Hamzah Norhayati, System Identification of Discrete Model for DC Motor Positioning, Recent Advances in Circuits, Systems, Electronics, Control and Signal Processing, pp. 212-216, (2016)
  • [5] Rodriguez-Abreo Omar, Rodriguez-Resendiz Juvenal, Alvarez-Alvarado Jose Manuel, Garcia-Cerezo Alfonso, Metaheuristic Parameter Identification of Motors Using Dynamic Response Relations, Sensors 2022, 22, 11, pp. 1-22
  • [6] Fazdi Mohamad Farid, Hsueh Po-Wen, Parameters Identification of a Permanent Magnet DC Motor: A Review, Electronics, MDPI, 12, 12, (2023)
  • [7] Lai Ta-Shi, Design and machining of the epicycloid planet gear of cycloid drives, Int J Adv Manuf Technol, 28, pp. 665-670, (2006)
  • [8] Kosse Vladis, Using Hysteresis Loop and Torsional Shock Loading to Assess Damping and Efficiency of Cyclodrives, Proc. of 14th Int. Cong. on Sound and Vibration (ICSV14), pp. 1-8, (2007)
  • [9] Davoli Piermaria, Gorla Carlo, Rosa Francesco, Longoni Claudio, Chiozzi Franco, Samarani Alessandro, Theoretical and Experimental Analysis of a Cycloidal Speed Reducer, Proc. of PTG 2007 ASME 2007 10th ASME International Power Transmission and Gearing Conference, (2007)
  • [10] Yukawa Toshihiro, Kumada Tetsuya, Obinata Goro, Continuously Variable Transmission Using Quadric Crank Chains, 8th IEEE Int. conf. on Industrial Informatics (INDIN 2010), pp. 1043-1048
12