Recent developments in the passive and hybrid thermal management techniques of lithium-ion batteries

被引：191

作者：

Patel J.R. ^{[1
]}

Rathod M.K. ^{[1
]}

机构：

[1] Mechanical Engineering Department, Sardar Vallabhai National Institute of Technology, Surat, 395007, Gujarat

来源：

Journal of Power Sources | 2022年 / 480卷

关键词：

Battery thermal management system; Heat pipe; Passive cooling; Phase change material;

D O I：

10.1016/j.jpowsour.2020.228820

中图分类号：

学科分类号：

摘要：

The main obstacle in the transition from petrol/diesel vehicles to electric vehicles (EVs) is the performance of power battery. The widely used lithium-ion battery is highly sensitive to the temperature, which affects the performance, lifespan, and safety of the battery. Hence, the proper battery thermal management system (BTMS) is necessary with EVs. BTMS can reduce the negative influence of the temperature by decreasing the maximum battery temperature and temperature difference inside the battery. This article reviews various battery thermal management systems and categorized as active and passive systems. The major focus of the review is on passive BTMS using phase change material (PCM) and heat pipe. The results show that PCM and heat pipe based BTMS can provide better thermal management without any power consumption. Further, the hybrid BTMS with the combination of active/passive is presented, and the research results show that hybrid BTMS can provide better thermal management compared to single BTMS. The BTMS is statistically reviewed in terms of maximum battery temperature and temperature difference, and percentage improvement using BTMS is also provided. This article provides direction towards the development of practical and economic BTMS for with limited power consumption, volume, and weight constraints. © 2020 Elsevier B.V.

引用

共 165 条

[1]

Global EV Outlook 2019, (2019)

[2]

Hannan M.A., Lipu M.S.H., Hussain A., Mohamed A., A review of lithium-ion battery state of charge estimation and management system in electric vehicle applications: challenges and recommendations, Renew. Sustain. Energy Rev., 78, pp. 834-854, (2017)

[3]

Espinosa D.C.R., Tenorio J.A.S., Use of nitrogen in the recycling of nickel cadmium batteries, J. Power Sources, 136, pp. 186-190, (2004)

[4]

Rydh C.J., Karlstrom M., Life cycle inventory of recycling portable nickel-cadmium batteries, Resour. Conserv. Recycl., 34, pp. 289-309, (2002)

[5]

Ovshinsky S.R., Fetcenko M.A., Ross J., A Nickel Metal Hydride battery for electric vehicles, Stanford R. Ovshinsky Sci. Technol. an Am. Genius., pp. 214-219, (2008)

[6]

Soltani M., Telmoudi A.J., Ben Belgacem Y., Chaari A., Parameters identification and discharge capacity prediction of Nickel–Metal Hydride battery based on modified fuzzy c-regression models, Neural Comput. Appl., (2019)

[7]

Sun Z., Cao H., Zhang X., Lin X., Zheng W., Cao G., Sun Y., Zhang Y., Spent lead-acid battery recycling in China – a review and sustainable analyses on mass flow of lead, Waste Manag., 64, pp. 190-201, (2017)

[8]

Vanysek P., Baca P., Zimakova J., Vaculik S., Bouska M., In-situ AFM observations of the effect of addition of glass fibers and lignosulfonates on performance of the negative active mass of a lead-acid storage battery, J. Energy Storage., 29, (2020)

[9]

Zubi G., Dufo-Lopez R., Carvalho M., Pasaoglu G., The lithium-ion battery: state of the art and future perspectives, Renew. Sustain. Energy Rev., 89, pp. 292-308, (2018)

[10]

Jin Y., Zhu B., Lu Z., Liu N., Zhu J., Challenges and recent progress in the development of Si anodes for lithium-ion battery, Adv. Energy Mater., 7, pp. 1-17, (2017)

← 1 2 3 4 5 6 7 8 9 10 →