Nanocrystallization Behaviour of Amorphous Co67Fe4Cr7Si8B14 Alloy

被引：0

作者：

Nykyruy Y. ^{[1
]}

Mudry S. ^{[1
]}

Kulyk Y. ^{[1
]}

Shtablavyi I. ^{[1
]}

机构：

[1] Metal Physics Department, Ivan Franko National University of Lviv

来源：

Defect and Diffusion Forum | 2024年 / 431卷

基金：

新加坡国家研究基金会;

关键词：

Co-based amorphous alloy; magnetic properties; nanocrystallization;

D O I：

10.4028/p-O8W6Nq

中图分类号：

学科分类号：

摘要：

The investigation addresses the structure of a Co-based alloy and its magnetic properties. The major applications of these materials are in the development of different sensors, which require materials with high permeability. The structure evolution processes need to be explored to clarify the main parameters determining the time-temperature stability. In the present paper, a nanocrystallization behavior of Co67Fe4Cr7Si8B14 amorphous alloy manufactured in the form of a ribbon was studied using X-ray diffraction and sample vibromagnetometry methods. The structure evolution induced by the 30min isothermal annealing at a temperature range of 450-700oC was studied by the X-ray diffraction method, and crystallization with hcp-Co, fcc-Co, and Co2B nanophases was revealed depending on the annealing temperature. According to thermomagnetic measurements, the nanocrystallization process corresponds to a three-stage crystallization model. The crystallization onset temperature of the amorphous alloy was observed to be equal540oC. The Curie point and saturation magnetization of the as-quenched alloy were defined as 305oC and 76 Am2/kg, respectively. © 2024 Trans Tech Publications Ltd, Switzerland.

引用

页码：3 / 11

页数：8

共 26 条

[1]

Zivotsky O, Titov A, Jiraskova Y, Bursik J, Hendrych A, Hrabovska K, Tsepelev V S, Surface and bulk magnetic anisotropy in bilayeredCoSiB/FeNbCuSiB and FeNbSiB/FeSiB ribbons, Journal of Alloys and Compounds, 681, pp. 402-411, (2016)

[2]

Russew K, Stojanova L, Properties and Applications of Amorphous Metallic Alloys, Glassy Metals, pp. 217-241, (2016)

[3]

Karolus M., Kwapulinski P., Chrobak D., Haneczok G., Chrobak A., J. Mater. Process. Tech, 162-163, (2005)

[4]

Torrens-Serra J., Roth S., Rodriguez-Viejo J., Clavaguera-Mora M.T., J. Non-Cryst. Solids, 354, (2008)

[5]

Fal Miyar V., Et al., Giant Magnetoimpedance of Electrochemically Surface Modified CoBased Amorphous Ribbons, IEEE Transactions on Magnetics, 44, 11, pp. 4476-4479, (2008)

[6]

Hristoforou E., Niarchos D., Amorphous wires in displacement sensing techniques, Journal of Magnetism and Magnetic Materials, 116, 1-2, pp. 177-188, (1992)

[7]

Mitra Amitava, R K R K, Ray and A K PandaApplications of rapidly solidified magnetic materials for structural health monitoring of engineering components, International Conference Magnetism and magnetic materials, (2017)

[8]

Panda A. K., Kumari S., Chattoraj I., Svec P., Mitra * A., Effect of Fe addition on the crystallization behaviour and Curie temperature of CoCrSiB-based amorphous alloys, Philosophical Magazine, 85, 17, pp. 1835-1845, (2005)

[9]

Kraus L., Svec P., Bydzovsky J., Amorphous CoFeCrSiB ribbons for strain sensing applications, Journal of Magnetism and Magnetic Materials, 242-245, pp. 241-243, (2002)

[10]

Bursik J., Bursikova V., Jiraskova Y., Study of the Mechanical Properties of SingleLayered and BilayeredCoCrFeSi Ribbons Using Quasistatic and Dynamic Nanoindentation Tests, Key Engineering Materials, 662, pp. 91-94, (2015)

← 1 2 3 →