UV-Laser Welding Process of Copper-Plated Glass

被引：0

作者：

Huang M. ^{[1
]}

Zhang Q. ^{[1
]}

Lü Q. ^{[2
]}

Zhang J. ^{[1
]}

Guo L. ^{[1
]}

机构：

[1] Guangdong Provincial Key Laboratory of Micro Nanophotonic Functional Materials and Devices, South China Normal University, Guangzhou

[2] Han's Laser Technology Industry Group Co., Ltd., Shenzhen

来源：

Zhongguo Jiguang/Chinese Journal of Lasers | 2020年 / 47卷 / 10期

关键词：

Finite element; Glass; Laser technique; Laser welding; Nanosecond laser; Optical fabrication; Stress;

D O I：

10.3788/CJL202047.1002007

中图分类号：

学科分类号：

摘要：

Glass was coated with copper films of different thicknesses by the vacuum evaporation method to realize the packaging technology for circuit manufacturing directly on glass substrate. Transient temperature and stress fields during welding of copper-plated glass were calculated using the ANSYS software. Welding experiments were conducted using a nanosecond ultraviolet laser, and the morphology and mechanical properties of welded joints were observed and tested. Theoretical calculations show that when the welding current intensity is 27 A, the average temperature of the copper film of the welding sample is approximately 3000℃, and the gasification speed of the copper film is slow; therefore, the welding effect is better. Thermal stresses are concentrated in the copper film whereas the thermal stress of glass is less than its theoretical strength. When the welding speed is 70 mm/s, the thermal stresses are the least. A copper film of thickness of 80 nm gives the highest welding sample tensile strength of 14.34 MPa. The optimal parameters of the laser welding process are the welding current intensity of 27 A, welding speed of 70 mm/s, and copper film thickness of 80 nm. © 2020, Chinese Lasers Press. All right reserved.

引用

共 12 条

[1] Su Z X, Xing C Y, Luo B, Et al., Microsystem wafer-level 3D packaging based on composite glass-silicon substrate, Navigation and Control, 18, 2, pp. 61-68, (2019)
[2] Cheng H, Chen M X, Luo X B, Et al., Ceramic substrate for electronic packaging, Advanced Ceramics, 40, 4, pp. 265-292, (2019)
[3] Tamaki T, Watanabe W, Nishii J, Et al., Welding of transparent materials using femtosecond laser pulses [J], Japanese Journal of Applied Physics, 44, 22, pp. L687-L689, (2005)
[4] Sugioka K, Iida M, Takai H, Et al., Efficient microwelding of glass substrates by ultrafast laser irradiation using a double-pulse train [J], Optics Letters, 36, 14, pp. 2734-2736, (2011)
[5] Wu S Z, Wu D, Xu J, Et al., Absorption mechanism of the second pulse in double-pulse femtosecond laser glass microwelding [J], Optics Express, 21, 20, pp. 24049-24059, (2013)
[6] Watanabe W, Onda S, Tamaki T, Et al., Space-selective laser joining of dissimilar transparent materials using femtosecond laser pulses [J], Applied Physics Letters, 89, 2, (2006)
[7] Ding T, Wang X H, Wang G D, Et al., Welding of fused silica by using high repetition frequency femtosecond laser, Chinese Journal of Lasers, 45, 7, (2018)
[8] de Pablos-Martin A, Hoche T., Laser welding of glasses using a nanosecond pulsed Nd:YAG laser [J], Optics and Lasers in Engineering, 90, pp. 1-9, (2017)
[9] Xu Z J., Influence of filmthickness and silicon content to conductivity and residual stress of silicon substrate copper film [J], Journal of Shaanxi Normal University (Natural Science Edition), 26, S1, pp. 198-200, (1998)
[10] Belitzki A, Stadter C, Zaeh M F., Distortion minimization of laser beam welded components by the use of finite element simulation and artificial intelligence [J], CIRP Journal of Manufacturing Science and Technology, 27, pp. 11-20, (2019)

← 1 2 →