Microstructural Dependence of Friction and Wear Behavior in Biological Shells

被引：0
作者：
Wang X. [1 ,3 ]
Yan Y. [1 ,3 ]
Ji H. [1 ,3 ]
Li X. [1 ,2 ]
机构：
[1] Department of Materials Physics and Chemistry, School of Material Science and Engineering, Northeastern University, Shenyang
[2] State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang
[3] Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education, Northeastern University, Shenyang
来源：
Journal of Renewable Materials | 2023年 / 11卷 / 08期
基金：
中国国家自然科学基金; 英国科研创新办公室;
关键词：
friction; hardness; microstructure; Mollusk shells; wear;
D O I：
10.32604/jrm.2023.027066
中图分类号：
学科分类号：
摘要：
As an essential renewable mineral resource, mollusk shells can be used as handicrafts, building materials, adsor-bents, etc. However, there are few reports on the wear resistance of their structures. The Vicker’s hardness and friction, and wear resistance of different microstructures in mollusk shells were comparatively studied in the present work. The hardness of prismatic structures is lower than that of cross-lamellar and nacreous structures. How-ever, the experimental results of sliding tests indicate that the prismatic structure exhibits the best anti-wear ability compared with foliated, crossed-lamellar, and nacreous structures. The anti-wear and hardness do not present a positive correlation, as the wear resistance properties of different microstructures in mollusk shells are governed jointly by organic matrix, structural arrangement, and basic building block actions. The present research findings are expected to provide fundamental insight into the design of renewable bionic materials with high wear resistance. © 2023, Tech Science Press. All rights reserved.
引用
收藏
页码：3297 / 3308
页数：11
相关论文
共 35 条
  • [1] Ram Chandar K., Hegde C., Yellishetty M., Gowtham Kumar B., Classification of stability of highwall during highwall mining: A statistical adaptive learning approach, Geotechnical and Geological Engineering, 33, 3, pp. 511-521, (2015)
  • [2] Sameoto D., Khungura H., Benvidi F. H., Asad A., Liang T. S., Et al., Chapter Fifteen–Space applications for gecko-inspired adhesives, Biomimicry for aerospace, pp. 423-458, (2022)
  • [3] Goswami A., A comparative study on the mechanical and structural design of nacre in gastropod and bivalve molluscs, Journal of the Mechanical Behavior of Biomedical Materials, 114, 102, (2021)
  • [4] Massah J., Fard M. R., Aghel H., An optimized bionic electro-osmotic soil-engaging implement for soil adhesion reduction, Journal of Terramechanics, 95, 5, pp. 1-6, (2021)
  • [5] Liang S. M., Ji H. M., Li X. W., Thickness-dependent mechanical properties of nacre in Cristaria plicata shell: Critical role of interfaces, Journal of Materials Science & Technology, 44, 1, pp. 1-8, (2020)
  • [6] Li M., Shi L. P., Wang X. L., Physical mechanisms behind the wet adhesion: From amphibian toe-pad to biomimetics, Colloids and Surfaces B: Biointerfaces, 199, 6787, (2021)
  • [7] Shan R., Zhao C., Lv P. M., Yuan H. R., Yao J. G., Catalytic applications of calcium rich waste materials for biodiesel: Current state and perspectives, Energy Conversion and Management, 127, 1, pp. 273-283, (2016)
  • [8] Currey J. D., Taylor J. D., The mechanical behavior of some molluscan hard tissues, Zoological Journal of the Linnen Society, 173, 3, pp. 395-406, (1974)
  • [9] Tong J., Wang H., Ma Y., Ren L., Two-body abrasive wear of the outside shell surfaces of mollusc Lamprotula fibrosa Heude, Rapana venosa Valenciennes and Dosinia anus Philippi, Tribology Letters, 19, 4, pp. 331-338, (2005)
  • [10] Stempfle P., Brendle M., Tribological behaviour of nacre-influence of the environment on the elementary wear processes, Tribology Internatinal, 39, 12, pp. 1485-1496, (2006)
1234