Design of Multi-Physical Field Coupling Model of Magnetic Latching Relay and Analysis of Influencing Factors of Contact Bounce

被引：0
作者：
Bao G. [1 ,2 ]
Wang J. [1 ]
Wang Y. [1 ]
机构：
[1] College of Electrical Engineering and Automation, Fuzhou University, Fuzhou
[2] Fujian Key Laboratory of New Energy Generation and Power Conversion, Fuzhou
来源：
Diangong Jishu Xuebao/Transactions of China Electrotechnical Society | 2023年 / 38卷 / 03期
关键词：
Ansys LS-DYNA; contact bounce; dynamic characteristics; Magnetic latching relay;
D O I：
10.19595/j.cnki.1000-6753.tces.211312
中图分类号：
学科分类号：
摘要：
Contact wear and contact adhesion caused by contact bounce have an important impact on the electrical life of relay. Considering the complex contact bounce of the magnetic latching relay under the interaction of elastic deformation of the reed and contact collision, the processing method defining the model as rigid body cannot restore the actual motion state of the flexible reed. The collision of the rigid body leads to the deformation of the spring of the flexible body, which affects the action time and bounce of the relay. The accurate simulation of the movement state of the reed is an important prerequisite to ensure that the simulation results of dynamic characteristics have reliable reference value. In order to improve the accuracy and reliability of dynamic characteristics simulation, a rigid flexible coupling dynamic model is established to simulate the movement state of the relay. The traditional rigid flexible coupling method of model is to obtain the modal neutral file required for the establishment of flexible body with the aid of finite element software, and realize the coupling of rigid flexible model by importing the modal neutral file into the rigid body model of multi-body dynamics software. In addition to material properties, the deformation of flexible bodies is also affected by the mode order and the key points derived from the modal neutral file. Based on the motion equation, material constitutive equation and boundary conditions, the mathematical model of the motion field of the relay is established. Considering the impact of collision deformation of components on relay operation process, symmetrical penalty function method, hourglass coefficient and damping coefficient are used to deal with collision, contact and deformation of components. With the dynamics software Ansys LS-DYNA, the rigid flexible coupling model of relay electromagnetic system, contact system and transmission mechanism is established. Use APDL to build mechanical dynamics model. The electromagnetic model of relay is established based on Maxwell equations, the three-dimensional finite element model of electromagnetic system components is established by using the electromagnetic software Ansys Maxwell, and the external circuit of relay excitation coil is established by using the simulation software Ansys Simplorer. The electromagnetic system component model and the external circuit of the coil are coupled to form the relay electromagnetic model. Compared with the traditional circuit editor coupling mode, Ansys Simplorer has a stronger control function and a Simulink communication interface to receive the motion data of the relay. Simulink is used to control the start stop and data processing of the electromagnetic model. There is no ready-made data interaction channel between the electromagnetic model and the dynamic model. The Matlab program is used to control the data exchange of different physical field models, so as to realize the coupling calculation and data interaction of multiple physical fields of the two models in the same time domain. The simulation results of the relay coil current curve, the reed shape variable of the dynamic model and the contact movement track are basically consistent with the measured results; Both the simulation and actual measurement of contact bounce show the phenomenon of bounce pull in bounce stable pull in, which verifies the accuracy of the multi physical field coupling model. On the basis of simulation, the influence of static spring elastic modulus, core coil voltage and normally closed static spring preload on contact bounce is investigated. The 3D transient multi physical field coupling simulation can truly restore the working state of the relay product, simulate the dynamic characteristics of the relay and the contact movement. The larger elastic modulus and the larger pre pressure of the normally closed static spring can optimize the structural design of the relay and inhibit the contact bounce. © 2023 Chinese Machine Press. All rights reserved.
引用
收藏
页码：828 / 840
页数：12
相关论文
共 22 条
  • [1] Fang Yaqi, Ren Wanbin, Experimental investigation of contact bounce phenomena occurred in electromagnetic relay, Electrical & Energy Management Technology, 6, pp. 5-9, (2020)
  • [2] Sun Shuguang, Wang Ruixiong, Du Taihang, Et al., Expected electrical life prediction of AC contactor based on rough set and evidence theory, Transactions of China Electrotechnical Society, 35, 10, pp. 2158-2169, (2020)
  • [3] Zhang Gaoting, Cao Yundong, Liu Wei, The natural vibration characteristics of reed relay, Transactions of China Electrotechnical Society, 35, 2, pp. 292-299, (2020)
  • [4] Li Yafeng, Wang Fazhan, Wang Yankun, Et al., Bumping behavior simulation and influencing factors analysis of contact system in AC contactor, Mechanical Science and Technology for Aerospace Engineering, 40, 1, pp. 55-62, (2021)
  • [5] Jiang Li, Wang Rui, Yuan Jing, Et al., Optimization design of electromagnetic relay based on improved particle swarm optimization algorithm, 2018 2nd IEEE Advanced Information Management, Communicates, Electronic and Automation Control Conference (IMCEC), pp. 202-205, (2018)
  • [6] Wu Jingxuan, Xu Zhihong, A model-free adaptive control strategy for actuation of electromagnetic contactors, Proceedings of the CSEE, 40, 5, pp. 1663-1673, (2020)
  • [7] Li Xingwen, Chen Degui, Sun Zhiqiang, Et al., Numerial analysis and experimental investigation of dynamic behavior and contact bounce of ac contactor, Proceedings of the CSEE, 24, 9, pp. 229-233, (2004)
  • [8] Bao Guanghai, Wu Shoulong, Dynamics simulation and experimental research on short-circuit breaking characteristics of contactor, Transactions of China Electrotechnical Society, 29, 9, pp. 181-186, (2014)
  • [9] Liu Jianqiang, Chen Aifeng, Yan Yifan, Et al., Reliability evaluation method of electromagnetic contactor used in high-speed train, Transactions of China Electrotechnical Society, 33, S2, pp. 461-471, (2018)
  • [10] Rong Mingzhe, Lou Jianyong, Wang Xiaohua, Simulation analysis and experimental research of operating characteristic for moving contact of contactor with permanent magnet actuator, Proceedings of the CSEE, 25, 1, pp. 109-113, (2005)
123