A constitutive structural parameter cb for the work hardening behavior of additively manufactured Ti-6Al-4V

被引：2
作者：
Jankowski A.F. [1 ]
机构：
[1] Sandia National Laboratories, Livermore, CA
来源：
Material Design and Processing Communications | 2021年 / 3卷 / 05期
关键词：
additive materials; plasticity; strength; titanium;
D O I：
10.1002/mdp2.262
中图分类号：
学科分类号：
摘要：
The mechanical behavior of Ti-6Al-4V produced by additive manufacturing processes is assessed as based on a model derived from the Kocks–Mecking relationship. A constitutive parameter cb is derived from a linear Kocks–Mecking relationship for the microstructure that is characteristic of the work hardening behavior. The formulation for cb is determined by considering the plastic strain between the strengths at the proportional limit and the plastic instability. In this way, the model accommodates the variation in work hardening behavior observed when evaluating material as produced and tested along different orientations. The modeling approach is presented and evaluated for the case of Ti-6Al-4V additively manufactured materials as tested under quasi-static uniaxial tension. It is found that different test specimen orientations, along with postbuild heat treatments, produce a change in the microstructure and plasticity behavior which can be accounted for in the corresponding change of the cb values. © 2021 John Wiley & Sons, Ltd.
引用
收藏
相关论文
共 19 条
  • [1] Liu S., Shin Y.C., Additive manufacturing of Ti6Al4V alloy: a review, Mater Design, 164, pp. 1-24, (2019)
  • [2] Liu Z., He B., Lyu T., Zou Y., A review on additive manufacturing of titanium alloys for aerospace applications: directed energy deposition and beyond Ti-6Al-4V, J. Metals, 73, pp. 1804-1818, (2021)
  • [3] Yang N., Yee J., Zheng B., Et al., Process-structure-property relationships for 316L stainless steel fabricated by additive manufacturing and its implications for component engineering, J Thermal Spray Technol, 26, 4, pp. 610-626, (2017)
  • [4] Razavi S.M.J., Ferro P., Berto F., Fatigue assessment of Ti-6Al-4V circular notched specimens produced by selective laser melting, Metals, 7, 8, pp. 1-10, (2017)
  • [5] Chern A.H., Nandwana P., Yuan T., Et al., A review on the fatigue behavior of Ti-6Al-4V fabricated by electron beam melting additive manufacturing, Int. J. Fatigue, 119, 6, pp. 173-184, (2018)
  • [6] Morris J.W., Is there a future for nanostructured steel?, pp. 2814-2818, (2007)
  • [7] Kocks U.F., Mecking H., Physics and phenomenology of strain hardening: the FCC case, Prog Mater Sci, 48, 3, pp. 171-273, (2003)
  • [8] Jankowski A.F., Chames J.M., Gardea A., Nishimoto R., Brannigan E.M., The softening factor c<sub>b</sub> of commercial titanium alloy wires, Intern J Mater Res, 110, 11, pp. 990-999, (2019)
  • [9] Jankowski A.F., Yang N., Lu W.-Y., Constitutive structural parameter c<sub>b</sub> for the work hardening behavior of laser powder-bed fusion, additively manufactured 316L stainless steel, Mater Des Proc Comm., 2, pp. 1-9, (2020)
  • [10] Carroll B.E., Palmer T.A., Beese A.M., Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing, Acta Mater, 87, pp. 309-320, (2015)
12