Thermal deformation behavior of TC21 titanium alloy

被引：0

作者：

Xie X. ^{[1
]}

Sun Q.-J. ^{[1
]}

Peng J.-H. ^{[1
]}

Zhou J.-W. ^{[1
]}

机构：

[1] School of Aeronautical Manufacturing Engineering, Nanchang Hongkong University, Nanchang

来源：

Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals | 2020年 / 30卷 / 09期

基金：

中国国家自然科学基金;

关键词：

Constitutive equation; Deformation temperature; Processing map; Strain rate; TC21 titanium alloy;

D O I：

10.11817/j.ysxb.1004.0609.2020-36496

中图分类号：

学科分类号：

摘要：

The high temperature hot compression deformation tests of TC21 titanium alloy were carried out by Gleeble-3500 thermal simulation machine. The test deformation temperature was in the range of 890-990℃ and the strain rate was in the range of 0.01-10 s-1. The microstructure evolution of the alloy during high temperature deformation was investigated by analyzing the stress-strain curves and the microstructure obtained under different hot deformation conditions. The results show that TC21 titanium alloy is very sensitive to deformation temperature and strain rate, and the flow stress increases with increase of strain rate and decrease of temperature. With increasing deformation temperature and decreasing strain rate, the dynamic recovery effect in the microstructure is enhanced and the number of dynamic recrystallized grains in the microstructure decreases. In addition, the high temperature constitutive equation of TC21 titanium alloy was established by the regression method. The experimental results show that the constitutive model is in good agreement with the experimental results. The processing map on the basis of Prasad instability criterion was established, which provided a theoretical basis for planning the forging process of TC21 titanium alloy. © 2020, Science Press. All right reserved.

引用

页码：2048 / 2058

页数：10

共 20 条

[1]

JIN He-xi, WEI Ke-xiang, LI Jian-ming, ZHOU Jian-yu, PENG Wen-jing, Research development of titanium alloy in aerospace industry, The Chinese Journal of Nonferrous Metals, 25, 2, pp. 280-292, (2015)

[2]

FENG Ying-fang, Research progress in application of titanium and titanium alloys in the world, World Nonferrous Metals, 4, pp. 54-57, (2012)

[3]

ZHU Zhi-shou, WANG Xin-nan, TONG Lu, SHANG Guo-qiang, Research and application of damage tolerance titanium alloys for aeronautical use, Materials china of Materials in China, 29, 5, pp. 14-17, (2010)

[4]

ZHU Zhi-shou, Research and development of advanced new type titanium alloys for aeronautical applications, Aeronautical Science & Technology, 1, pp. 5-9, (2012)

[5]

MA Shao-jun, WU Xue-ren, LIU Jian-zhong, WANG Li-fa, Influence of microstructure on mechanical properties for TC21 titanium alloy, Journal of Aeronautical Materials, 26, 5, pp. 22-25, (2006)

[6]

SHAO Hui, ZHAO Yong-qing, GE Peng, GE Peng, ZHOU Wei, YANG Yi, ZENG Wei-dong, Effects of different microstructure types on the strength and plasticity of TC21 alloy, Rare Metal Materials and Engineering, 42, 4, pp. 845-848, (2013)

[7]

LUO Jiao, LI Miao-quan, LI Hong, YU Wei-xin, Effect of the strain on the deformation behavior of isothermally compressed Ti-6Al-4V alloy, Materials Science & Engineering A, 505, 1, pp. 88-95, (2009)

[8]

WANG Tian-sheng, LI Xin, LU Shi-qiang, WANG Ke-lu, DONG Xian-juan, Simulation and prediction of unstable deformation microstructure of titanium alloy TC21 in hot compression, Journal of Plasticity Engineering, 23, 5, pp. 144-148, (2016)

[9]

ZHAO Yan-lei, LI Bo-long, ZHU Zhi-shou, NIE Zuo-ren, Influence of high temperature deformation parameters on microstructure and properties of TC21 titanium alloy, The Chinese Journal of Nonferrous Metals, 20, S1, pp. 132-137, (2010)

[10]

DAI Jun, LI Xin, LU Shi-Qiang, WANG Ke-lu, Constitutive equation of titanium alloy TC21 deformation at high temperature, Journal of Netshape Forming for Engineering, 6, 6, pp. 116-121, (2014)

← 1 2 →