Study of Oxide Film Formed on Domestic ZIRLO Alloy in Stimulate Corrosion Environment

被引：0

作者：

Bai R. ^{[1
]}

Gao Y. ^{[1
]}

Liang X. ^{[2
]}

Chen D. ^{[1
]}

Wang H. ^{[1
]}

Hou Y. ^{[1
]}

Chen X. ^{[1
]}

Li M. ^{[1
]}

Li Y. ^{[1
]}

Liu X. ^{[1
]}

Sun K. ^{[1
]}

Liu Y. ^{[1
]}

机构：

[1] China Institute of Atomic Energy, Beijing

[2] Laboratory for Microstructures, Shanghai University, Shanghai

来源：

Yuanzineng Kexue Jishu/Atomic Energy Science and Technology | 2020年 / 54卷 / 12期

关键词：

Corrosion; Domestic ZIRLO alloy; Microstructure; Oxide film;

D O I：

10.7538/yzk.2020.youxian.0294

中图分类号：

学科分类号：

摘要：

By using the internal heating method, reactor stimulation loop corrosion experiments were carried out in the solution containing 650 mg/L boron and 3.5 mg/L lithium, at the temperature of 346.7℃ and pressure of 15.5 MPa, to study the properties of domestic ZIRLO. The optical microscope, transmission electron microscope and pulse heating inert gas fusion infrared absorption method were selected to characterize the ZILRO samples corroded for 2, 18, 250 d. The results show that the main types of the grains of oxide film formed on domestic ZILRO are columnar grains and equiaxed grains. As the corrosion time increasing, the columnar grains located at the outer part of the oxide film gradually transform into equiaxed grains, which will lead to the increase of the grain boundary density and oxygen diffusion channels. The main types of second phase particles are containing Nb particles and containing Fe and Nb particles respectively, with the shape of ellipsoid. The corrosion process does not change the structure and content of the second phase particles, and most of the particles embed in oxide films remained un-oxidized state. With the increase of corrosion time, the number and the size of the pores and microcracks in the oxide film also increase, and most of these cracks are located at the wave peak of the O/M interface or the second phase particles due to the tensile stress effects. As for the hydrides generated from the corrosion reaction, the content of these hydrides increases from 10 ppm to 80 ppm, and the size increases from tens of microns to hundreds of microns, which are mainly distributed circumferentially. © 2020, Editorial Board of Atomic Energy Science and Technology. All right reserved.

引用

页码：2461 / 2468

页数：7

共 24 条

[11]

(2008)

[12]

LI Xiaoyang, Principle and tantalum-niobium applications of RH600 hydrogen mensuration equipment, Hunan Nonferrous Metals, 29, 2, pp. 82-84, (2013)

[13]

YILMAZBAYHAN A, BREVAL E, MOTTA A T, Et al., Transmission electron microscopy examination of oxide layers formed on Zr alloys, Journal of Nuclear Materials, 349, 3, pp. 265-281, (2006)

[14]

CAO Xiaoxiao, YAO Meiyi, PENG Jianchao, Et al., Corrosion behavior of Zr(Fex,Cr1-x)2 alloys in 400℃ superheated steam, Acta Metallurgica Sinica, 47, 7, pp. 882-886, (2011)

[15]

WOO O T, MCDOUGALL G M, HUTCHEON R M, Et al., Corrosion of electron-irradiated Zr-2.5Nb and Zircaloy-2, Zirconium in the Nuclear Industry: Twelfth International Symposium, (2000)

[16]

SABOL G P, KILP G R, BALFOUR M G, Et al., Development of a cladding alloy for high burnup, Zirconium in the Nuclear Industry: Eighth International Symposium, (1989)

[17]

PROFF C, ABOLHASSANI S, LEMAIGNAN C., Oxidation behaviour of zirconium alloys and their precipitates: A mechanistic study, Journal of Nuclear Materials, 432, 1-3, pp. 222-238, (2013)

[18]

LIU Qingdong, ZHANG Hao, ZENG Qifeng, Et al., Pre-transition corrosion behavior of SZA-4 and ZIRLO alloys in dissolved oxygen aqueous conditions at 360℃, Journal of Mechanical Engineering, 55, 8, pp. 88-96, (2019)

[19]

GODLEWSKI J, BOUVIER P, LUCAZEAU G, Et al., Stress distribution measured by Raman spectroscopy in zirconia films formed by oxidation of Zr-based alloys, Zirconium in the Nuclear Industry: Twelfth International Symposium, (2000)

[20]

COX B., Some thoughts on the mechanisms of in-reactor corrosion of zirconium alloys, Journal of Nuclear Materials, 336, 2-3, pp. 331-368, (2005)

← 1 2 3 →