Stall characteristics research of blended-wing-body aircraft

被引：0
|
作者：
Fu J. [1 ]
Shi Z. [1 ]
Zhou M. [1 ]
Wu D. [2 ]
Pan L. [2 ]
机构：
[1] College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing
[2] Shanghai Aircraft Design and Research Institute, COMAC, Shanghai
来源：
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2020年 / 41卷 / 01期
关键词：
Blended-wing-body; Flow field analysis; Force measurement analysis; Stall characteristics; Wind tunnel test;
D O I：
10.7527/S1000-6893.2019.23176
中图分类号：
学科分类号：
摘要：
As one of the main configurations of the next generation's commercial aircraft, Blended-Wing-Body (BWB) configuration aircraft has attracted more and more attention. While the research of BWB aircraft is mainly focused on the characteristics of its cruise phase, few have studied the stall characteristics. In this paper, the BWB is studied by wind tunnel test. The configuration of the non-lift device and the longitudinal characteristics of the composite components with winglet, leading edge slat, and double nacelles are studied by the force measurement method, especially the stall characteristics. The flow mechanism of the stall process is studied by the two-dimensional image testing technology. The results show that the BWB aircraft can maintain low-speed flight in the basic configuration without lift-up device, and the combination configuration has the effect of increasing lift coefficient. And with the increase of the angle of attack, the separation region gradually develops from the wing tip to the wing root and the fuselage. When the outer wing is completely in the separation region, the aircraft will not stall immediately. Because the centrosome also provides lift, and the flow separation of the centrosome is later than the outer wing. Therefore, when the outer wing causes lift loss at stall angle of attack, the lift of the centrosome can be compensated to maintain its low-speed flight phase. The real stall occurs after the flow separation of the centrosome. © 2020, Press of Chinese Journal of Aeronautics. All right reserved.
引用
收藏
相关论文
共 26 条
  • [1] Derek N.J., David G., Westland Fixed Wing Aircraft 1915-1953, 259-260, pp. 50-70, (2018)
  • [2] Liebeck R.H., Design of the blended wing body subsonic transport, Journal of Aircraft, 41, 1, pp. 10-25, (2004)
  • [3] Jorrit V.D., Roelof V., Conceptual design and analysis of blended-wing-body aircraft, Journal of Aerospace Engineering, 228, 13, pp. 2452-2474, (2014)
  • [4] Ordoukhanian E., Madni A.M., Blended wing body architecting and design: Current status and future prospects, Procedia Computer Science, 28, pp. 619-625, (2014)
  • [5] Zhu Z.Q., Wang X.L., Wu Z.C., Et al., A new type of transport-Blended wing body aircraft, Acta Aeronautica et Astronautica Sinica, 29, 1, pp. 49-59, (2008)
  • [6] Roman D., Aerodynamic design challenges of the blended-wing-body subsonic transport, Applied Aerodynamics Conference, (2000)
  • [7] Qin N., Vavalle A., Moigne A.L., Et al., Aerodynamic considerations of blended wing body aircraft, Progress in Aerospace Sciences, 40, 6, pp. 321-343, (2004)
  • [8] Jiang J., Zhong B.W., Fu S., Influence of overall configuration parameters on aerodynamic characteristics of a blended-wing-body aircraft, Acta Aeronautica et Astronautica Sinica, 37, 1, pp. 278-289, (2016)
  • [9] Paulus D., Salmon T., Mohr B., Configuration selection for a 450-passenger ultraefficient 2020 aircraft, 4th European Conference for Aerospace Sciences, (2011)
  • [10] Li P.F., Zhang B.Q., Chen Y.C., Et al., Aerodynamic design methodology for blended wing body transport, Chinese Journal of Aeronautics, 25, 4, pp. 508-516, (2012)
123