Modeling and compensation of geometric error chain of on-machine inspection mechanism for gear grinder

被引：0

作者：

Yang Y. ^{[1
]}

Wang Z. ^{[1
]}

Liu X. ^{[2
]}

Chen G. ^{[3
]}

Kubo A. ^{[4
]}

机构：

[1] School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai

[2] Shanghai University of Engineering Science, Shanghai

[3] Hunan Jinnengda Electromechanical Technology Co., Ltd., Yiyang

[4] School of Engineering, Kyoto University, Kyoto

来源：

Wang, Zhonghou (wangzhusst@163.com) | 1600年 / Science Press卷 / 42期

关键词：

Error accumulation effect; Error compensation; Gear grinder; Geometric error chain; On-machine inspection;

D O I：

10.19650/j.cnki.cjsi.J2107539

中图分类号：

学科分类号：

摘要：

Due to the geometric error influence, the existing research mainly considers the geometric error compensation of end-mechanism or key moving-axis, lacks successive compensation of moving-axis-geometric-error. In order to avoid error accumulation effect caused by geometric error chain of on-machine inspection mechanism and effectively improve on-machine inspection accuracy, according to the on-machine inspection principle of the independently developed horizontal gear grinder, based on the multi-rigid body system kinematics and homogeneous coordinate transformation theory, the geometric error chain model of on-machine inspection mechanism is established. After the moving-axis-geometric-errors of geometric error chain are identified and compensated step by step, the standard sample gear inspections of the gear grinder were carried out. Results show that before and after error compensation, the tooth lead accuracies are both at level 4; after error compensation, the tooth profile accuracy is improved by 4 grades and is at level 4, which is consistent with the result of Gleason inspections. The results verify the correctness of the model, which is expected to be used in high-precision on-machine inspection system of gear grinder. © 2021, Science Press. All right reserved.

引用

页码：9 / 19

页数：10

共 16 条

[1]

GAO F, ZHAO B H, LI Y, Et al., On-machine measurement scheme generation and optimization method for multi-axis CNC machine tool, Journal of Mechanical Engineering, 53, 20, pp. 13-19, (2017)

[2]

QIU Z R, SHI ZH Y, LI Y., Research on the development of measurement technology mechanical manufacture, Journal of Mechanical Engineering, 46, 14, pp. 1-11, (2010)

[3]

WANG ZH H, SONG X M, HE W M, Et al., Tooth surface model construction and error evaluation for tooth-trace modification of helical gear by form grinding [J], China Mechanical Engineering, 26, 21, pp. 2841-2847, (2015)

[4]

WEI SH H, ZHANG J Y, FENG X G., Dynamic error analysis and compensation of CNC high speed measurement, Journal of Electronic Measurement and Instrumentation, 34, 5, pp. 43-50, (2020)

[5]

GUO SH J, WU J X, QIAO G., Study on parametric modeling and application of sinusoidal lower-order polynomials for geometric error of CNC machine tool [J], Chinese Journal of Scientific Instrument, 41, 10, pp. 136-146, (2020)

[6]

HU T, GUO X P, MI L, Et al., A methodology for identifying crucial error elements of horizontal machining centers [J], China Mechanical Engineering, 31, 13, pp. 1539-1547, (2020)

[7]

ZHU SH W, DING G F, QIN SH F, Et al., Integrated geometric error modeling, identification and compensation of CNC machine tools [J], International Journal of Machine Tools & Manufacture, 52, pp. 24-29, (2012)

[8]

LI J, XIE F G, LIU X J, Et al., Analysis on the research status of volumetric positioning accuracy improvement methods for five-axis NC machine tools, Journal of Mechanical Engineering, 53, 7, pp. 113-128, (2017)

[9]

YANG Q Y, HAN J, ZHANG K B, Et al., Geometric error analysis and function compensation of a CNC forming wheel grinding machine, China Mechanical Engineering, 24, 23, pp. 3144-3149, (2013)

[10]

CHEN J X, LIN SH W., Geometric error decoupling for multi-axis CNC machines based on differential transformation, China Mechanical Engineering, 25, 17, pp. 2290-2294, (2014)

← 1 2 →