Investigating mechanical strength of a natural fibre polymer composite using SiO2 nano-filler

被引：0

作者：

Jotiram G.A. ^{[1
]}

Palai B.K. ^{[2
]}

Bhattacharya S. ^{[3
]}

Aravinth S. ^{[4
]}

Gnanakumar G. ^{[5
]}

Subbiah R. ^{[6
]}

Chandrakasu M. ^{[7
]}

机构：

[1] Department of Mechanical Engineering, D. Y. Patil College of Engineering and Technology, Maharashtra, Kolhapur

[2] Department of Mechanical Engineering, School of Engineering and Technology, GIET University, Odisha, Gunupur

[3] Research Scholar, Department of Textile Technology, Maulana Abul Kalam Azad University of Technology, West Bengal, Howrah

[4] Department of Mechanical Engineering, Rajalakshmi Institute of Technology, Kuthampakkam,Chennai, 600124, Tamilnadu

[5] Department of Mechanical Engineering, Panimalar Institute of Technology, Poonamallee, Tamilnadu, Chennai

[6] Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Telangana, Hyderabad

[7] Department of Civil Engineering, Road and Transportation Engineering, College of Engineering & Technology, Wollega University

来源：

Materials Today: Proceedings | 2022年 / 56卷

关键词：

Epoxy composite; Kenaf fibre; Mechanical strength; Nano-filler; Natural fibre;

D O I：

10.1016/j.matpr.2022.01.176

中图分类号：

学科分类号：

摘要：

Introducing nano-fillers in natural fibre polymer composite materials have attained a greater attention in recent days due to their distinct behavior in improving the mechanical characteristics of the composites with less effort. In this study, the effect of introducing nano-SiO2 filler in kenaf fibre polymer composite on their mechanical characteristics is analyzed. The nano-fillers with five different mass fractions namely 0%, 1%, 2%, 3%, and 4% were tested in this work. The tensile, compressive and impact strengths of the composites were investigated. The results evidenced that the increment in nano-filler content proportionally improved the strength of the composite until the addition of 2% of nanofiller and then, the improvement was not impressive. The maximum enhancement of 20.61% in tensile strength, 23.71% in compressive strength, and 22.88% in impact strength was attained with 2% fraction of nanofiller in composite. © 2022

引用

页码：1522 / 1526

页数：4

共 26 条

[21] Mechanical and vibration characteristics of hybrid natural fibre-reinforced composite using taguchi grey relational analysis
Pitchumani, Shenbaga Velu
Suthenthiraveerappa, Vimalanand
Gopalan, Venkatachalam
Loganathan, T. G.
Narasingamurthi, Kulasekaran
Sampath, Aravindh
[J]. ENGINEERING RESEARCH EXPRESS, 2024, 6 (02):
[22] Comparing the Carbon Fibre influence in pp/sisal/ SiO2 nanoparticle fillers/Carbon hybrid nanocomposites with neat nanocomposite for improving the mechanical properties
Saravanan R.
Arunachalam S.J.
Sathish T.
[J]. Interactions, 2024, 245 (01)
[23] An impact on mechanical properties of a Ni-P coated bamboo fibre / nano TiO2 reinforced polyester matrix composite
Magesh, G.
Elansezhian, R.
[J]. AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2024, 22 (05) : 924 - 934
[24] Mechanical properties of hybrid glass/kenaf fibre-reinforced epoxy composite with matrix modification using liquid epoxidised natural rubber
Muhammad, Yusri H.
Ahmad, Sahrim
Abu Bakar, Mimi A.
Mamun, Abdullah A.
Heim, Hans P.
[J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2015, 34 (11) : 896 - 906
[25] Morphological, Mechanical, and Antimicrobial Properties of PBAT/Poly(methyl methacrylate-co-maleic anhydride)-SiO2 Composite Films for Food Packaging Applications
Venkatesan, Raja
Alagumalai, Krishnapandi
Raorane, Chaitany Jayprakash
Raj, Vinit
Shastri, Divya
Kim, Seong-Cheol
[J]. POLYMERS, 2023, 15 (01)
[26] Investigating the solid particle erosion behavior of H3BO3 / B2O3 / SiO2 / Al2O3 reinforced glass fibre/epoxy composites and parametric evaluation using artificial intelligence
Bagci, Mehmet
Bhaumik, Shubrajit
[J]. TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2024, 18 (03) : 171 - 182

← 1 2 3 →