Type Synthesis and Classification of Space Curve Translation Parallel Mechanisms

被引:0
作者
Ye M. [1 ,2 ]
Shi Z. [1 ]
Luo Y. [1 ,3 ]
机构
[1] School of Mechanical and Electronic Engineering, Nanchang University, Nanchang
[2] School of Science, Nanchang University, Nanchang
[3] School of Mechatronics and Vehicle Engineering, East China Jiaotong University, Nanchang
来源
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2019年 / 50卷 / 06期
关键词
Bending translation; Curve translation mechanism; Parallel mechanism; Type synthesis;
D O I
10.6041/j.issn.1000-1298.2019.06.047
中图分类号
学科分类号
摘要
Topological structure synthesis is the most original part of mechanical system design. Aiming at the problems in the existing theories on type synthesis of robot mechanisms, such as incompleteness of synthesis results, inapplicability to bending translation mechanisms and so on, the method of type synthesis and classification for parallel mechanisms with bending translation motion characteristic was proposed. First of all, lines, curves, planes and surfaces were regarded as independent spaces based on the Gauss non-Euclidean intrinsic geometry, which can be used to describe the translation characteristics of the end-effector. Then a motion characteristic model of bending translation was established, which included motion type (translation and rotation), motion direction, dimension and overall geometric shape of motion space. Secondly, the forming mechanism of bending translation was studied, and the relevant operation rules of bending translation motion characteristics were formulated, which made the intersection of all limbs' motion characteristics for parallel mechanism relatively straightforward and simple. After that, according to the geometric morphological features of space curves, the space curve translation mechanisms can be divided into nine basic types. Finally, the method of type synthesis for space curve translation mechanisms was illustrated by two examples, and the complete procedures for structural synthesis of cylinder-cylinder intersection line translation mechanism and cylinder-cone intersection line translation mechanism were shown by using this method. © 2019, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码:397 / 404
页数:7
相关论文
共 23 条
  • [1] Huang Z., Li Q.C., Type synthesis of symmetrical lower-mobility parallel mechanisms using the constraint-synthesis method, International Journal of Robotics Research, 22, 1, pp. 59-79, (2003)
  • [2] Kong X.W., Gosselin C.M., Type Synthesis of Parallel Mechanisms, (2007)
  • [3] Yang S.F., Sun T., Hung T., Et al., A finite screw approach to type synthesis of three-DOF translational parallel mechanisms, Mechanism and Machine Theory, 104, pp. 405-419, (2016)
  • [4] Sun T., Yang S.F., Huang T., Et al., A way of relating instantaneous and finite screws based on the screw triangle product, Mechanism and Machine Theory, 108, pp. 75-82, (2017)
  • [5] Sun T., Huo X.M., Type synthesis of 1T2R parallel mechanisms with parasitic motions, Mechanism and Machine Theory, 128, pp. 412-428, (2018)
  • [6] Zhao Y.Z., Cao Y.C., Kong X.W., Type synthesis of parallel mechanisms with a constant Jacobian matrix, Journal of Mechanisms and Robotics, 10, 6, pp. 1011-1021, (2018)
  • [7] Herve J.M., The Lie group of rigid body displacements, a fundamental tool for mechanism design, Mechanism and Machine Theory, 34, 7, pp. 719-730, (1999)
  • [8] Li Q.C., Huang Z., Herve J.M., Type synthesis of 3R2T 5-DOF parallel mechanisms using the lie group of displacements, IEEE Transactions on Robotics and Automation, 20, 2, pp. 173-180, (2004)
  • [9] Meng J., Liu G.F., Li Z.X., A geometric theory for analysis and synthesis of sub-6 DOF parallel manipulators, IEEE Transactions on Robotics, 23, 4, pp. 625-649, (2007)
  • [10] Li Q.C., Herve J.M., 1T2R parallel mechanisms without parasitic motion, IEEE Transactions on Robotics, 26, 3, pp. 401-410, (2010)