Dynamic Characteristic of Droplet Collision at Hydrophilic-hydrophobic Interface

被引:0
|
作者
Kong Q. [1 ]
Ji X. [1 ]
You T. [1 ]
Zhou R. [1 ]
Xu J. [1 ]
机构
[1] Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy, North China Electric Power University, Beijing
关键词
Collision; Droplet; Dynamic characteristic; Surface energy; Wettability;
D O I
10.7538/yzk.2019.youxian.0654
中图分类号
学科分类号
摘要
Droplet collision with different wettability surfaces will exhibit different dynamic behaviors. To study the dynamic behavior of droplets collision at the hydrophilic-hydrophobic interface, a superhydrophilic-superhydrophobic hybrid wettability surface was prepared. The droplets (the initial diameter D0 is 1.80 mm) were controlled to collide on the superhydrophilic-superhydrophobic interface at different speeds. The results show that when the droplets collide with the hydrophilic-hydrophobic interface, the adjacent two extreme wettability surfaces will generate the driving force for droplet spreading. And the droplets will spread completely in the superhydrophilic region. The maximum spreading diameter can reach 5.51 mm and the droplet spreading coefficient β can be up to 2.93. When the droplet collides with the hydrophilic-hydrophobic interface at a certain speed, the droplet spreading and the droplet bounce occur simultaneously. The droplet spreading coefficient first increases, then decreases, and there is a "spike" in the spreading coefficient curve. The final spreading coefficient gradually increases and tends to be stable. The greater the impact speed, the larger the spreading coefficient in the early stage of spreading. The energy analysis during the droplet spreading process shows that the mutual conversion of droplet kinetic energy and surface energy is the key to droplet motion and spreading. © 2020, Editorial Board of Atomic Energy Science and Technology. All right reserved.
引用
收藏
页码:1801 / 1808
页数:7
相关论文
共 18 条
  • [1] WANG C H, TSAI H L, WU Y C, Et al., Investigation of molten metal droplet deposition and solidification for 3D printing techniques, Journal of Micromechanics and Microengineering, 26, 9, (2016)
  • [2] JUNG S, HOATH S D, HUTCHINGS I M., The role of viscoelasticity in drop impact and spreading for inkjet printing of polymer solution on a wettable surface, Microfluidics and Nanofluidics, 14, 1-2, pp. 163-169, (2013)
  • [3] FINOTELLO G, PADDING J T, BUIST K A, Et al., Droplet collisions of water and milk in a spray with Langevin turbulence dispersion, International Journal of Multiphase Flow, 114, pp. 154-167, (2019)
  • [4] XU M J, ZHANG J Q, CHEN R Y, Et al., Single droplet with or without additives impacting on high-temperature burning liquid pool, International Journal of Heat and Mass Transfer, 139, pp. 77-86, (2019)
  • [5] DAI Chao, JI Xianbing, ZHOU Dongdong, Et al., Behavioral characteristics of droplet collision to different wettability surfaces, Journal of Zhejiang University: Engineering Science, 52, 1, pp. 36-42, (2018)
  • [6] RIOBOO R, TROPEA C, MARENGO M., Outcomes from a drop impact on solid surfaces, Atomization and Sprays, 11, 2, pp. 155-166, (2001)
  • [7] ZHANG Fan, CHEN Feng, BO Hanliang, Experimental study of liquid droplet dynamic behaviors impacting on surfaces with different hydrophilicity/hydrophobicity, Atomic Energy Science and Technology, 49, pp. 288-293, (2015)
  • [8] TILGER C F, BEACHAM S T, OEHLSCHLAEGER M A., Lateral jetting during off-center drop collisions on substrates, International Journal of Heat and Mass Transfer, 122, pp. 740-748, (2018)
  • [9] YANG Huan, SUN Ke, XUE Yao, Et al., Controllable drop splashing on picosecond laser patterned hybrid superhydrophobic/-philic surfaces, Applied Surface Science, 481, pp. 184-191, (2019)
  • [10] SEO J, LEE J S, KIM H Y, Et al., Empirical model for the maximum spreading diameter of low-viscosity droplets on a dry wall, Experimental Thermal and Fluid Science, 61, pp. 121-129, (2015)