Mesh Stiffness Analysis of Planetary Gear System with Gear Tip Relief

被引：0

作者：

Ma H. ^{[1
]}

Duan T.-T. ^{[1
]}

Sun Y.-N. ^{[1
]}

Chen K.-K. ^{[1
]}

机构：

[1] School of Mechanical Engineering & Automation, Northeastern University, Shenyang

来源：

Dongbei Daxue Xuebao/Journal of Northeastern University | 2019年 / 40卷 / 03期

关键词：

Gear structure; Gear tip relief; Mesh stiffness; Planetary gear system;

D O I：

10.12068/j.issn.1005-3026.2019.03.015

中图分类号：

学科分类号：

摘要：

Taking the planetary gear system as the research object, which contains lightening hole of sun gear, pin support of ring gear and the flexible carrier arm, a finite element model of planetary gear system with gear tip relief was established on the basis of ANSYS software. Based on the model, the influence of the gear tip relief and gear structure, such as lightening hole of sun gear, the rim thickness of ring gear and the flexible carrier arm, on the mesh stiffness was analyzed. The results show that the gear tip relief changes the shape and value of the mesh stiffness curve. Mesh stiffness decreases with the increase of lightening hole size. However, with the increase of the backup ratio of ring gear, the mesh stiffness increases gradually. Meanwhile, the more flexible the carrier arm is, the smaller the gear meshing stiffness fluctuates. The research results may provide a theoretical basis for the design of planetary gear system considering gear modification in actual production. © 2019, Editorial Department of Journal of Northeastern University. All right reserved.

引用

页码：380 / 385

页数：5

共 10 条

[1]

Parker R.G., Mesh phasing relationships in planetary and epicyclic gears, Journal of Mechanical Design, 126, 2, pp. 365-370, (2004)

[2]

Liang X.H., Zuo M.J., Patel T.H., Evaluating the time-varying mesh stiffness of a planetary gear set using the potential energy method, Journal of Mechanical Engineering Science, 228, 3, pp. 535-547, (2014)

[3]

Liang X.H., Zuo M.J., Pandey M., Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set, Mechanism and Machine Theory, 76, 6, pp. 20-38, (2014)

[4]

Chen Z.G., Shao Y.M., Dynamic simulation of planetary gear with tooth root crack in ring gear, Engineering Failure Analysis, 31, 9, pp. 8-18, (2013)

[5]

Yang Y., Zhu R.-P., Parameterized modeling of planetary gears based on APDL, Mechanical Engineer, 3, 3, pp. 108-109, (2008)

[6]

Ambarisha V.K., Parker R.G., Nonlinear dynamics of planetary gears using analytical and finite element models, Journal of Sound and Vibration, 302, 3, pp. 577-595, (2007)

[7]

Xue S., Entwistle R., Mazhar I., Et al., The spur planetary gear torsional stiffness and its crack sensitivity under quasi-static conditions, Engineering Failure Analysis, 63, pp. 106-120, (2016)

[8]

Xue S., Howard I., Torsional vibration signal analysis as a diagnostic tool for planetary gear fault detection, Mechanical Systems and Signal Processing, 100, pp. 706-728, (2018)

[9]

Fan L., Wang S.P., Wang X.J., Et al., Nonlinear dynamic modeling of a helicopter planetary gear train for carrier plate crack fault diagnosis, Chinese Journal of Aeronautics, 29, 3, pp. 675-687, (2016)

[10]

Pandya Y., Parey A., Crack behavior in a high contact ratio spur gear tooth and its effect on mesh stiffness, Engineering Failure Analysis, 34, pp. 69-78, (2013)

← 1 →