Investigation on influence of variant acceleration on phase change heat transfer characteristics of low melting point metal

被引：0

作者：

Yang X. ^{[1
]}

Chen K. ^{[1
]}

Ke H. ^{[1
]}

Xiao Q. ^{[1
]}

机构：

[1] Science and Technology on Thermal Energy and Power Laboratory, Wuhan Second Ship Design and Research Institute, Wuhan

来源：

Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition) | 2022年 / 50卷 / 12期

关键词：

electronics cooling; flight condition; low melting point metal; ocean rolling condition; phase change material;

D O I：

10.13245/j.hust.221218

中图分类号：

学科分类号：

摘要：

The phase change heat transfer characteristics of low melting point metal under complicated environment，such as ocean rolling condition and flight acceleration-varying condition，is unclear，which hinders its application in the field of thermal control of electronics in ship，missile and aircraft． The transportation model of solid-liquid heat transfer problem under complicated environment was provided and typical cases were numerically studied．The rolling condition leads to ±21% fluctuation of the heat transfer intensity，which will affect the transient thermal control performance of low melting point metal heat sink． The high acceleration under flight condition in missile enhances the natural convection inside the molten region and thus enhance the heat transfer，which is beneficial for the thermal control performance，while the uniform temperature distribution thus resulted needs attention in practice to avoid local overheating. © 2022 Huazhong University of Science and Technology. All rights reserved.

引用

页码：143 / 148

页数：5

共 17 条

[11] GREEN C E，, FEDOROV A G，, JOSHI Y K．, Time scale matching of dynamically operated devices using composite thermal capacitors[J], Microelectronics Journal, 45, 8, pp. 1069-1078, (2014)
[12] GE H，, LI H，, MEI S, Low melting point liquid metal as a new class of phase change material：an emerging frontier in energy area[J], Renewable and Sustainable Energy Reviews, 21, pp. 331-346, (2013)
[13] GONZALEZ NINO D, BOTELER L M，, IBITAYO D, Experimental evaluation of metallic phase change materials for thermal transient mitigation[J], International Journal of Heat and Mass Transfer, 116, pp. 512-519, (2018)
[14] YANG X H，, LIU J．, Advances in liquid metal science and technology in chip cooling and thermal management [J], Advances in Heat Transfer, 50, pp. 187-300, (2018)
[15] CRANK J．, Free and moving boundary problems[M], (1984)
[16] YANG X H，, TAN S C，, LIU J．, Numerical investigation of the phase change process of low melting point metal[J], International Journal of Heat and Mass Transfer, 100, pp. 899-907, (2016)
[17] YANG X H，, LIU J．, Probing the Rayleigh-Benard convection phase change mechanism of low-melting-point metal via lattice Boltzmann method[J], Numerical Heat Transfer，Part A：Applications, 73, 1, pp. 34-54, (2018)

← 1 2 →