A combined solution of thermoelectric coolers and microchannels for multi-chip heat dissipation with precise temperature uniformity control

被引：24

作者：

Cong B. ^{[1
,2
]}

Kong Y. ^{[1
]}

Ye Y. ^{[1
]}

Liu R. ^{[1
]}

Du X. ^{[1
]}

Yu L. ^{[1
,2
]}

Jia S. ^{[1
,2
]}

Qu Z. ^{[3
]}

Jiao B. ^{[1
]}

机构：

[1] Institute of Microelectronics of the Chinese Academy of Sciences, Beijing

[2] University of Chinese Academy of Sciences, Beijing

[3] School of Energy and Power Engineering, Xi'an Jiaotong University, Xian

来源：

Applied Thermal Engineering | 2023年 / 219卷

关键词：

Microchannel heat sink; Multi-chip temperature uniformity; Thermal test chip; Thermoelectric cooler;

D O I：

10.1016/j.applthermaleng.2022.119370

中图分类号：

学科分类号：

摘要：

Effective thermal management with precise temperature uniformity is necessary to improve the performance and stability of multi-chip devices such as active phased array antennas, semiconductor laser radar systems, and light emitting diode (LED) arrays. This study proposes a combined solution for multi-chip devices heat dissipation that integrates thermoelectric coolers (TECs) and microchannel heat sink to tune the temperature of each chip dynamically by controlling multiple TEC currents independently. The equivalent variable thermal resistance of the TEC can be dynamically adjusted under different TEC currents, thereby realizing the equivalent thermal resistance value of TECs change on the heat dissipation path of different chips and the precise temperature control and continuity at desired temperature range. A simplified thermal resistance network of multi-chip is established to illustrate the dynamic control mechanism of multi-chip temperature uniformity based on the variable thermal resistance. Not only the heat dissipation and temperature control of single chip under different operating conditions (TEC current, flow rate, and heat flux), but also the temperature uniformity control of multi-chip is studied. The combined cooling scheme is compared and analyzed with the microchannel cooling. The results show that this combined cooling scheme can achieve precise temperature control of multiple chips with maximum temperature difference less than 0.3 °C and temperature standard deviation less than 0.07 °C, which is far less than the maximum temperature difference of 7.89 °C and temperature standard deviation of 3.55 °C when the heat flux is 50 W/cm2. This represents a feasible solution for the realization of precise temperature uniformity and dynamic temperature control in multi-chip devices. © 2022 Elsevier Ltd

引用

共 43 条

[1] Luo X., Mao Z., (2012)
[2] Ge J., Jin D., Qian Z., Research on heat dissipation technology of the high-power array antenna, Proceedings of the Seventh Asia International Symposium on Mechatronics, pp. 400-412, (2019)
[3] Wang L., Wang Z., Wang C., Yin G., Multiobjective optimization method for multichannel microwave components of active phased array antenna, Math. Probl. Eng., 2016, (2016)
[4] Park Y., Cho Y., You J., Park C., Yoon H., Lee S., Na B., Ju G., Choi H., Lee Y., A robust design and fabrication of micromachined electro-absorptive optical modulator for 3D imaging, MOEMS and Miniaturized Systems XIII, (2014)
[5] Chen H., Zhou X., Zhang Y., Lin S., Zhou J., Fei Y., Study on the staggered array of an LED system for improved thermal behavior, Appl. Opt., 54, 22, pp. 6752-6757, (2015)
[6] Hetsroni G., Mosyak A., Segal Z., Ziskind G., A uniform temperature heat sink for cooling of electronic devices, Int. J. Heat Mass Transf., 45, 16, pp. 3275-3286, (2002)
[7] Qu W., Mudawar I., (2002)
[8] (1997)
[9] Wei T., Huang H., Ma Y., Qian J., Design and fabrication of multi-layer silicone microchannel cooler for high-power chip array, 22nd International Conference on Electronic Packaging Technology, (2021)
[10] Qian S., Wang W., Ge C., Lou S., Miao E., Tang B., (2017)

← 1 2 3 4 5 →